|
|
high gain multi-input dc-dc converter with combined phase-shift/pwm modulation for stand-alone applications
|
|
|
|
|
نویسنده
|
khademi astaneh p. ,javidan j. ,valipour kh. ,akbarimajd a.
|
منبع
|
journal of operation and automation in power engineering - 2019 - دوره : 7 - شماره : 1 - صفحه:49 -57
|
چکیده
|
The objective of this paper is to introduce a new multi-input converter for a hybrid supply system containing photovoltaic, fuel cell, and battery for medium power applications. in this converter, the current ripple of fuel cell is removed, due to the utilization of a coupled inductor. since, a combination of the magnetizing and the leakage inductors of two boosting transformers are used, a soft switching condition exists for semiconductors. to improve the reliability of the system, three switch-legs are used which results in distributed power transfer and increases the system redundancy from the reliability point of view. the steady state model and control system are discussed for the proposed converter. at the high voltage side of converter, two transformers are connected in series to achieve high voltage gain. an experimental prototype has been designed and examined in the laboratory to evaluate the proposed converter performance.
|
کلیدواژه
|
dc-dc converter ,multi-input converter ,soft switching ,hybrid power supply
|
آدرس
|
university of mohaghegh ardabili, department of electrical engineering, ایران, university of mohaghegh ardabili, department of electrical engineering, ایران, university of mohaghegh ardabili, department of electrical engineering, ایران, university of mohaghegh ardabili, department of electrical engineering, ایران
|
پست الکترونیکی
|
adelakbary@yahoo.com
|
|
|
|
|
|
|
|
|
مبدل DCDC چندورودی با راندمان بالا و مدولاسیون شیفت فاز و پهنای پالس برای کاربردهای مستقل از شبکه
|
|
|
Authors
|
جاویدان جواد ,ولی پور خلیل ,اکبری مجد عادل
|
Abstract
|
در این مقاله، یک روش تحلیلی و غیرتکراری برای حل مسئله در مدار قرارگیری نیروگاهها (UC) با در نظر گرفتن محدودیتهای مختلف ارائه شده است. در روش پیشنهادی، جدول تقاضای توان از پیشتهیه شده بهبودیافته (IPPD) برای حل مسئله UC مورد استفاده قرار گرفته است، سپس روش تحلیلی “λlogic” برای حل زیرمسئله پخش بار اقتصادی استفاده شده است. ماهیت تحلیلی و غیرتکراری دو روش فوق، منجر به ساده شدن حل مسئله UC شده است. این روش همچنین مزایای صرفهجویی در هزینه و زمان را داراست، که به خصوص در سیستمهای مقیاس بزرگ مهم است. روش پیشنهادی در سیستمهای با 10 واحد و 40100 واحد نیروگاه با در نظر گرفتن قیود مختلف مانند: محدودیت تولید توان واحدهای نیروگاهی، محدودیت ذخیره، حداقل زمان روشن و خاموش بودن واحدهای نیروگاهی و ... تست شده است. مقایسه نتایج شبیهسازی روش پیشنهادی با نتایج روشهای ارائه شده در سایر مقالات نشان میدهد که روش پیشنهادی راه حل بهتری را در زمان محاسباتی کم، به خصوص در سیستمهای مقیاس بزرگ، ارائه میدهد.
|
Keywords
|
|
|
|
|
|
|
|
|
|
|
|