Task based synthesis of serial manipulators

Computing the optimal geometric structure of manipulators is one of the most intricate problems in contemporary robot kinematics. robotic manipulators are designed and built to perform certain predetermined tasks. there is a very close relationship between the structure of the manipulator and its kinematic performance. it is therefore important to incorporate such task requirements during the design and synthesis of the robotic manipulators. such task requirements and performance constraints can be specified in terms of the required end-effector positions,orientations and velocities along the task trajectory. in this work,we present a comprehensive method to develop the optimal geometric structure (dh parameters) of a non-redundant six degree of freedom serial manipulator from task descriptions. in this work we define,develop and test a methodology to design optimal manipulator configurations based on task descriptions. this methodology is devised to investigate all possible manipulator configurations that can satisfy the task performance requirements under imposed joint constraints. out of all the possible structures,the structures that can reach all the task points with the required orientations are selected. next,these candidate structures are tested to see whether they can attain end-effector velocities in arbitrary directions within the user defined joint constraints,so that they can deliver the best kinematic performance. additionally least power consuming configurations are also identified. © 2015.