>
Fa   |   Ar   |   En
   طراحی، ساخت و ارزیابی یک دستگاه اندازه‌گیری فرسایش‌پذیری نسبی خاک به فرسایش بادی  
   
نویسنده قائمی‌نیا علی محمد ,حکیم‌زاده اردکانی محمدعلی
منبع مهندسي و مديريت آبخيز - 1399 - دوره : 12 - شماره : 2 - صفحه:405 -414
چکیده    با توجه به اهمیت پدیده فرسایش بادی، شناخت سریع مناطق حساس به برداشت و کانون ‌های فرسایش بادی حائز اهمیت است. در این پژوهش، دستگاهی سبک و کارآمد به‌ منظور ایجاد شرایط اعمال تنش ثابت باد بر سطح ذرات خاک و اندازه گیری ذرات فرسایش‌ پذیر، طراحی، ساخته و ارزیابی شده است. اصول طراحی دستگاه، تولید جریان باد به‌وسیله دمنده و اندازه‌ گیری میزان ذرات سست و ناپایدار برداشت شده در مخزنی با بیشترین کارایی بود. با ساخت نمونه اولیه دستگاه با استفاده از اجزا و قطعات طراحی شده، دستگاه در صحرا مورد ارزیابی قرار گرفت و به‌ وسیله یک کاربر در صحرا و بدون نیاز به مولد برق قابل استفاده بوده، وزن ذرات جمع شده در مخزن نشان ‌دهنده میزان فرسایش‌پذیری نسبی اراضی نقطه آزمون به باد است. با بهره ‌گیری از کیسه فیلتر هوا، از دست رفتن ذرات ریز فرسایش‌ پذیر به خارج از دستگاه به کمترین مقدار رسید و اندازه‌گیری کمتر از مقدار واقعی فرسایش‌ پذیری اراضی کاسته شد. نتیجه مقایسه اندازه ‌گیری حساسیت خاک به فرسایش به‌ وسیله دستگاه در اراضی بیابانی شمال دشت یزداردکان با میزان ارتفاع بادبردگی خاک از زیرشاخص‌ های نصب شده نشان داد، این دستگاه توانایی خوبی (0.57=r^2) در تشخیص سریع مناطق حساس به بادبردگی داشته، بدون اندازه ‌گیری خصوصیات فیزیکی و شیمیایی خاک امکان شناسایی اولیه اراضی حساس به فرسایش بادی وجود دارد. این دستگاه به‌ طور واقعی فرایندهای طبیعی فرسایش بادی که به ‌وسیله جهش ذرات ایجاد می‌ شود را شبیه‌ سازی نمی ‌کند، اما با استفاده از آن می‌ توان به شاخص جدیدی برای ارزیابی فرسایش ‌پذیری خاک و به‌دنبال آن شناسایی محل انتشار گرد و غبار دست یافت.
کلیدواژه بیابان‌زایی، تولید جریان باد، شبیه‌سازی، گرد و غبار، مناطق خشک
آدرس دانشگاه یزد, دانشکده منابع طبیعی و کویرشناسی, ایران, دانشگاه یزد, دانشکده منابع طبیعی و کویرشناسی, ایران
پست الکترونیکی hakimzadeh15@gmail.com
 
   Design, fabrication and evaluation of a measuring device for relative erodibility of soil to wind erosion  
   
Authors Ghaeminia Ali Mohammad ,Hakimzadeh Ardakani Mohammadali
Abstract    With regards to the wind erosion phenomenon importance, it is vital to quick identification of areas that are sensitive to dust removal and wind erosion processes. In this research, a lightweight and efficient device is designed, fabricated and evaluated in order to create conditions for applying constant wind stress on soil particle surfaces and measuring erosive particles. The production of wind power by a blower and measuring the amount of loose and unstable particles that were harvested in the reservoir with the highest efficiency were the principles of designing the device. The prototype of the device was designed using components and parts, and the device was evaluated in the field. The device is usable by a user in the field without the need for a power generator and the weight of the particles collected in the tank indicates the relative erodibility of the test site to the wind. Using the air filter bag (tank), it was possible to achieve a minimum loss of fine particulate matter and has been reduced the measure of less than the actual amount of land erosion. The result of the comparison of the sensitivity of soil sensitivity to erosion by the device in desert lands of northern YazdArdakan Plain with the height of winding of the soil with the installation of the index showed that this device has good capability (R2= 0.57) in the rapid detection of areas susceptible to wind and without measuring physical and chemical properties of the soil, there is an early identification of wind erosionsensitive land. This device does not actually simulate the natural processes of wind erosion created by the particle saltation, but using it, a new index can be obtained for assessing soil erodibility and subsequently identified the location of dust emissions.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved