تحلیل آمار فضایی زلزله و تطابق آن با گسل ها و رسوبات سست کواترنری با استفاده از Gis در استان خوزستان

آنچه دارای اهمیت است وضعیت شهرها و کلان شهرهایی است که بر روی گسل ها یا در مجاورت آنها ساخته شده و در معرض خطر زلزله قرار دارند. هدف اصلی این پژوهش تجزیه تحلیل آمار فضایی زلزله های استان خوزستان و تطابق آن با گسل ها و رسوبات سست کواترنری می باشد. جهت بررسی خوشه های زلزله ابتدا به تعیین بهترین روش درونیابی زلزله از شاخص کریجیینگ پرداخته شد که نتایج نشان داد که روش وزن دهی معکوس با ضریب تعییین 0.75 بهترین مدل جهت پهنه بندی زلزله می باشد. برای تحلیل و توزیع فضایی زلزله از  شاخص موران ولکه های داغ با استفاده از نرم افزار arcgis10 و با ابزار موجودspatial statistics tools  که بسیار منعطف است استفاده شد. تحلیل خوشه ای یک روند کلی است و میتواند توسط الگوریتم های مختلفی به دست آید. بیشترین الگوی خوشه ای زلزله مربوط به زلزله های بزرگتر از 6 ریشتر 1.003665 می باشد. نتایج بررسی جهت کلی زلزله در استان خوزستان در دوره آماری 1929-2014 نشان داد که جهت زلزله های با بزرگی مختلف در این استان از شمال غربی به سمت جنوب شرقی می باشد. زلزله با گسل ها و سازند کواترنر رابطه مستقیم دارد.

Earthquake spatial statistics analysis and its adaptation to faults and quaternary loess sediments using GIS (Case of study Khuzestan province)

What is important is the condition of cities and metropolises that are located on faults or in the vicinity of them and are in danger of earthquakes. The main objective of this research is to analyze the spatial statistics of earthquakes in Khuzestan province and its adaptation to loose faults and sediments. Quaternary. In order to investigate earthquake clusters, the first step was to determine the best earthquake interpolation method from the kriging index. The results showed that the inverse weighing method with the coefficient of 0.75 is the best model for earthquake zoning. For the analysis and distribution of the earthquake spatial distribution, Hot applications using the ArcGIS 10 software and the very flexible Spatial Statistics Tools tool were used. The cluster analysis is a general trend and can be obtained by various algorithms. The largest earthquake cluster pattern is related to earthquakes larger than 6 magnitudes of 003665/1. The results of the total earthquake investigation in Khuzestan province during the statistical period of 20142019 showed that the magnitude of the earthquakes in this province is from the northwest to the southeast. The earthquake has a direct relationship with faults and quaternary formation.Extended abstractIntroduction          Statistical studies of earthquakes, especially in recent decades, show that Iran is one of the most important earthquakeprone countries in the world and we have witnessed many incidents (Hashemi 2010: 10). Also in the AlpineHimalayan earthquake belt, Iran has experienced 130 earthquakes of magnitude 7.5 or more over the past centuries, killing tens of thousands of people (Aghamohammadi 2016: 47). Undoubtedly, such earthquakes are not the last earthquakes to occur in Iran and lead to national crises. Today, the importance of the earthquake in our country is further understood by the intensification of the country’s development process, urban development, population concentration and increasing material and spiritual capital and increasing the vulnerability of these assets in the seismic zone of Iran. With the increasing development and expansion of large cities in earthquakeprone areas in terms of population, economy, politics and society, the vulnerability of these cities to destructive earthquakes is increasing (Adib 2016: 6). Land features of the Zagros and Khuzestan plains have caused a large number of faults that are the source of earthquakes in this region (Naseri 2016: 47).Methodology:          In this study, for the construction of the earthquake zone in Khuzestan province, data related to the severity of the earthquake in the study area entered the GIS database and by using statistical techniques, zoning was used to measure the earthquake in the study area. Was. Selfcorrelation is related to the relationship between residual values ​​along the regression line. Strong selfcorrelation occurs when the values ​​of a variable that are geographically close are related to each other, in other words, their changes occur systematically. If the effects or values ​​of the variables related to them are randomly distributed in space, there should apparently be no connection between them. The Moran test examines the distribution pattern of these effects by considering the values ​​of the studied traits in terms of cluster pattern or scattering. Indicates a completely unipolar (cluster) pattern, a value of zero indicates a random or multipolar aggregation pattern, and a value of 1. indicates a scattered pattern. The higher the coefficient, the higher the accumulation and the lower It is scattered. The result is displayed as clustered, random, or dispersed on the model output. The tools of this model are located in spatial statistics tools > analyzing tools. Khuzestan province with an area of 64236 square kilometers is located between 47 degrees and 41 minutes to 50 degrees and 29 minutes east longitude and 29 degrees and 58 minutes to 33 degrees and 4 minutes north latitude of the equator in southwestern Iran. It is bordered by Lorestan province to the north, Chaharmahal Bakhtiari, Kohkiluyeh and BoyerAhmad provinces to the east and northeast, the Persian Gulf to the south, Iraq to the west, Ilam province to the northwest, and Iraq to the northeast. It is neighboring with Ilam province and from the southeast with Bushehr province and has 24 cities, 51 districts, 127 villages and 54 cities.Result and discution:     At this stage, after extracting the earthquakes in Khuzestan province, we analyze the space of the earthquake in this province. At this stage, the optimal map, which has a redemption status, becomes a point where each area values ​​both the points and the values ​​side by side, which are also known as value groups. One of the indicators of spatial analysis is Moran index, this index relies on two important principles, one has a specific distribution of indicators and also relies on the values ​​of coexistence. One of the weaknesses of this analysis is that it cannot identify the various types of spatial patterns. To analyze the spatial clustering of the earthquake in Khuzestan province using ArcGIS10 software and with the tools of Spatial Statistics Tools, which is very flexible, it was used.Conclusion:     Most faults and fractures in Khuzestan province, northwestsoutheast and consequently the distribution of the epicenter of the earthquake has a wide pattern, with a northwestsoutheast trend. Northwestsoutheast faults play an important role in seismic activity in the area, and the high density of seismic activity in areas with higher density of faults in the province confirms this. Studies have shown that seismic indexing, muran index, and clustering index can be used to segregate earthquakes, fault densities, and seismic zones. Moran statistics and hot spots were used to determine the pattern of earthquakes of different magnitudes in Khuzestan province. The largest cluster pattern of earthquakes is related to earthquakes larger than 6 Richter (003665/1). The hotspot analysis was used to show in which areas of high or low spatial focus. In the results of this analysis, hot and cold points in terms of magnitude of earthquakes in the area of ​​each region are well identified and show that hot spots are seen in the province. How close are these centers to the city centers or are they located near any of the cities in each city? By examining these centers periodically, we can monitor the movement of the epicenter and be more prepared for the change of time. The results of the general direction of earthquake in Khuzestan province in the statistical period of 19292014 showed that the direction of earthquakes with different magnitudes except earthquakes with magnitudes greater than 6 Richter in this province is from northwest to southeast. It is likely that the presence of weak Quaternary faults and sediments along this route has been the main cause of these earthquakes in this direction. That is, the existence of weak Quaternary faults and sediments has been one of the main reasons for the earthquake in such a direction. Regarding the compatibility of earthquakes with weak Quaternary faults and sediments, it can be said that the greatest compatibility of faults and weak Quaternary sediments is related to earthquakes with magnitudes greater than 6 Richter.