|
|
بررسی کارایی پودر آلوئه ورای اصلاح شده با اسید سولفوریک در حذف بیس فنل a از محلول های آبی
|
|
|
|
|
نویسنده
|
سمرقندی محمدرضا ,درگاهی عبداله ,ذوالقدر نسب حسن ,موسوی رحیم ,پی خوشیان علی
|
منبع
|
سلامت و بهداشت - 1400 - دوره : 12 - شماره : 3 - صفحه:325 -339
|
چکیده
|
زمینه و هدف: فنل یکی از آلایندههای آلی موجود در پساب صنایع بوده و بهشدت برای انسان و محیط زیست سمی است و بنابراین قبل از تخلیه آن به محیط زیست، باید مورد تصفیه قرار گیرد. هدف از این مطالعه بررسی مقایسه ای کارایی پودر آلوئه ورای اصلاح شده با اسید سولفوریک در حذف بیس فنل a از محلولهای آبی میباشد. روش کار: این تحقیق به روش آزمایشگاهی و بهصورت ناپیوسته انجام گرفت. ابتدا گیاه آلوئه ورا تهیه و برگ این گیاه چندین بار با آب مقطر برای حذف ناخالصیهای موجود شسته شد و در فور در دمای 120 درجه سانتیگراد به مدت 24 ساعت خشک و با الک استاندارد astm با مش 50 دانهبندی گردید. تغییرات ph (11-3)، مقدار جاذب (g/l 1-5)، زمان تماس (min 10-90) و غلظت بیس فنل a (mg/l 10-50) بررسی شد. بهینه سازی آزمایشات و تحلیل داده ها در فرایند جذب جهت حذف بیس فنل a با استفاده از طراحی مرکب مرکزی (ccd) انجام گردید. یافتهها: نتایج نشان داد که با افزایش زمان تماس و دوز جاذب میزان جذب ترکیب فنلی افزایش مییابد. حداکثر جذب بیس فنل a در ph برابر با 3 و غلظت اولیه بیس فنل a 10 میلیگرم در لیتر به دست آمد. بر اساس آنالیز واریانس نتایج آزمایشات از بین مدل های مختلف، مدل درجه دوم (quadratic) جهت برآورد حذف بیس فنل a توسط فرایند جذب با جاذب اصلاح شده مورد برررسی انتخاب شد. ضریب رگرسیون خطی (r2) بین آزمایشات و مقادیر مختلف پاسخ در مدل 0.96 بود. مقدار بهینه برای متغیرهای مورد بررسی شامل 6= ph، دوز جاذب: g/l 4.2، زمان تماس: min 65 و غلظت بیس فنل a برابر mg/l 40 بدست آمد که در این شرایط راندمان حذف bpa برابر 87.06 درصد بدست آمد.نتیجهگیری: نتایج بدست آمده نشان داد که فرایند جذب با جاذب اصلاح شده قادر به حذف بیس فنل a با راندمان نسبتاً بالا میباشد. همچنین از این روش میتوان برای تصفیه فاضلابهای صنایع نفت و پتروشیمی حاوی ترکیبات فنلی استفاده کرد.
|
کلیدواژه
|
فرایند جذب، بیس فنل a، آلوئه ورا، محلول های آبی
|
آدرس
|
دانشگاه علوم پزشکی همدان, دانشکده بهداشت, گروه مهندسی بهداشت محیط, ایران, دانشگاه علوم پزشکی اردبیل, مرکز تحقیقات عوامل اجتماعی موثر بر سلامت, ایران, دانشگاه علوم پزشکی همدان, دانشکده بهداشت, گروه مهندسی بهداشت محیط, ایران, دانشگاه علوم پزشکی همدان, دانشکده بهداشت, گروه مهندسی بهداشت محیط, ایران, دانشگاه علوم پزشکی همدان, دانشکده بهداشت, گروه مهندسی بهداشت محیط, ایران
|
|
|
|
|
|
|
|
|
|
|
investigating the efficacy of aloe vera powder modified with sulfuric acid in removing bisphenol a from aqueous solutions
|
|
|
Authors
|
samarghandi m.r. ,dargahi a. ,zolghadr nasab h. ,mosavi r. ,peykhoshian a.
|
Abstract
|
background & objectives: phenol is one of the organic pollutants in industrial effluents and is highly toxic to humans and the environment, so it must be treated before being discharged into the environment. the aim of this study was the comparative investigation of the performance of aloe vera powder modified with sulfuric acid in removing bisphenol a from aqueous solutions.methods: this research was performed in a laboratory method in batch system. first, aloe vera was prepared and its leaves were washed several times with distilled water to remove impurities. it was dried in the oven at 120 for 24 h and was sieved with standard astm 50 mesh. changes in ph (3-11), adsorbent dosage (1-5 g/l), contact time (10-90 min) and bisphenol a concentration (10-50 mg / l) were investigated. optimization of experiments and data analysis in the adsorption process to eliminate base phenol a was performed using central composite design (ccd).results: the results showed that the adsorption rate of phenolic compound increases with increasing contact time and adsorption dose. the maximum adsorption of bisphenol a was obtained at ph of 3 and the initial bisphenol a concentration of 10 mg/l. based on the analysis of variance of test results from different models, the second-order (quadratic) model was selected to estimate the removal of bis phenol a by the adsorption process using the modified adsorbent. the linear regression coefficient (r2) between the experiments and the different values of the response in the model was 0.96. the optimal value for the studied variables included ph of 6, adsorbent dose of 4.2 g/l, contact time of 65 min and bis phenol a concentration of 40 mg/l. under these conditions, the efficiency of bpa removal was 87.06%.conclusion: the results showed that the adsorption process using the modified adsorbent is able to remove the bisphenol a with relatively high efficiency. this method can also be used to treat wastewater from oil and petrochemical industries containing phenolic compounds.
|
Keywords
|
adsorption process ,bisphenol a ,aloe vera ,aqueous solutions
|
|
|
|
|
|
|
|
|
|
|