|
|
آمایش سطحی نانو آلومینا با آمینوسیلان: بررسی اثر غلظت آمینوسیلان بر شیمی سطحی و کاربردی نانو آلومینا
|
|
|
|
|
نویسنده
|
رستمی مهران
|
منبع
|
مواد پيشرفته و پوشش هاي نوين - 1395 - شماره : 16 - صفحه:1129 -1146
|
چکیده
|
در این تحقیق، اصلاع سطحی نانو ذرات آلومینا از نوع گاما با آمینو پروپیل تری متوکسی سیلان انجام شد. اصلاح سطحی تحت شرایط هیدرولیز و تراکمی در غلظت های مختلفو با در نظر گرفتن نقطه ایزوالکتریک نانو آلومینا صورت گرفت. به منظور کمی کردن فرایند آمایش سطحی ذرات، یکسری آزمون برای شناسایی ذرات آمایش شده انجام شد. این آزمونها شامل اندازه گیری چگالی،ph،تجزیه و تحلیل حرارتی ، تحلیل عنصری ، مساحت سطح betو پتانسیل زتا بوده است. جهت بررسی برهمکنش سطحی و شیمیایی ذرات اصلاح شده و اصلاح نشده با ماتریس رزینی، آزمون های دینامیکی مکانیک حرارتی ، میزان پخت، چگالی شبکه ای شدن و میزان مه گونگی پوشش نانو کامپوزیتی بررسی شد. نتایج نشان داد که با افزایش میزان سیلان سطحی،برهمکنش های فیزیکی و شیمیایی ذرات با ماتریس رزینی پلی یورتان افزایش یافته و در نتیجه خواص مکانیکی افزایش می یابد. با توجه به محدود بودن گروه های هیدروکسیل قابل واکنش در سطح آلومینا،میزان سیلان واکنش کرده در سطح نیز محدود بوده است.
|
کلیدواژه
|
نانو گاما آلومینا، آمایش سطحی، آمینو سیلان، پوشش شفاف پلی یورتان
|
آدرس
|
موسسه پژوهشی علوم و فناوری رنگ و پوشش, گروه پژوهشی نانو فناوری رنگ, ایران
|
پست الکترونیکی
|
rostami-m@icrc.ac.ir
|
|
|
|
|
|
|
|
|
Surface treatment of nanoalumina with aminosilane: the effect of silane concentration on the surface chemistry and performance of nanoalumina
|
|
|
Authors
|
Rostami Mehran
|
Abstract
|
In this study, gamma nanoalumina was treated with aminopropyl trimethoxy silane coupling agent. Surfacemodification was performed under hydrolysis and condensation condition and then under stoichiometricconcentration, according to isoelectric point of nanoalumina. To quantifying surface modificationof particles, some analyses were performed, including density, pH, TGA, CHN measurements, BET, andZeta Potential. To probe interfacial and chemical intraction of the modified and unmodified particleswith polyurethane resin, some tests such as DMTA, crosslink density, heat of curing and Haz value ofpolyurethane nanocomposit were performed. Results show that increasing the amount of surface modifiercauses increase in physical and chemical intraction of particles with polyurethan matrix. Consideringthat the hydroxyl groups on the alumina surface are scarce, the reactions of silane molecules withthe surface of the alumina particles are rare, too.
|
Keywords
|
|
|
|
|
|
|
|
|
|
|
|