Stabilization of indigenous Saudi Arabian soils using fuel oil flyash

Fuel oil flyash (ffa) produced in power and water desalination plants firing crude oils in the kingdom of saudi arabia is being disposed in landfills, which increases the burden on the environment, therefore, ffa utilization must be encouraged. in the current research, the effect of adding ffa on the engineering properties of two indigenous soils, namely sand and marl, was investigated. ffa was added at concentrations of 5%, 10% and 15% to both soils with and without the addition of portland cement. mixtures of the stabilized soils were thoroughly evaluated using compaction, california bearing ratio (cbr), unconfined compressive strength (usc) and durability tests. results of these tests indicated that stabilized sand mixtures could not attain the aci strength requirements. however, marl was found to satisfy the aci strength requirement when only 5% of ffa was added together with 5% of cement. when the ffa was increased to 10% and 15%, the mixture’s strength was found to decrease to values below the aci requirements. results of the toxicity characteristics leaching procedure (tclp), which was performed on samples that passed the aci requirements, indicated that ffa must be cautiously used in soil stabilization.