|
|
پتانسیلسنجی تهویۀ طبیعی در فضاهای اداری از منظر اقلیم و طرح فضای داخلی در مراکز استان
|
|
|
|
|
نویسنده
|
راه حق پریسا ,زمردیان زهرا سادات ,تحصیلدوست محمد
|
منبع
|
مطالعات معماري ايران - 1402 - دوره : 12 - شماره : 24 - صفحه:169 -191
|
چکیده
|
تهویۀ طبیعی از مهمترین استراتژیهای غیرفعال کاهش مصرف انرژی ساختمان، ایجاد آسایش حرارتی، و بهبود کیفیت هوای داخل ساختمان بوده و از راهحلهای کلیدی برای دستیابی به پایداری در صنعت ساختمان است. ازسوی دیگر، پتانسیل تهویۀ طبیعی بهشدت وابسته به شرایط آبوهوایی است و بهطور قابل توجهی از منطقهای به منطقۀ دیگر متفاوت است. این درحالی است که اطلاعاتی از برقراری این امکان در کشور در دسترس نیست. ازاینرو پژوهش حاضر پتانسیلسنجی تهویه برای استفادۀ حداکثری در اقلیمهای مختلف ایران را در دو بخش و دو مقیاس مطالعه کرده است. نخست پتانسیل تهویه در مقیاس اقلیم بر اساس دادههای هواشناسی ارزیابی شده و حداکثر پتانسیل تهویۀ طبیعی 31 مرکز استان ازطریق محاسبۀ تعداد ساعات مناسب برای بهرهگیری از تهویه برآورد شده و در بخش دوم تاثیر تهویه بر ارتقای آسایش حرارتی و کیفیت هوا در مقیاس ساختمان در فضای داخلی بررسی شده است. به این منظور، یک مدول از یک ساختمان اداری در نرمافزار راینو مدلسازی شده، سپس با استفاده از پلاگین کلایمت استودیو محدودیتهایی بر دادههای هواشناسی (دما، باد و رطوبت) اعمال شده است. درنهایت، نتایج بهصورت نقشه و با ارائۀ دستهبندی گزارش شده است. طبق نتایج، ساعات تهویۀ طبیعی از 1095 تا 6158 ساعت، درصد ساعات آسایش از 33.15% تا 50.32%، درصد ساعاتی با غلظت کربندیاکسید استاندارد از 10.89% تا 50.16% و درصد ساعاتی با نرخ تعویض هوای مناسب نیز از 11.55% تا 48.85% متغیر بودهاند. بر این اساس، بهمنظور پاسخ به پرسش پژوهش (هریک از مناطق و اقالیم ایران، چه مقدار پتانسیل استفاده از تهویۀ طبیعی دارند؟) اطلس پتانسیل تهویۀ طبیعی فضاهای داخلی در اقلیمهای مختلف کشور (و محدود به مراکز استانها) تهیه شده که قابلیت استفاده در فرایند طراحی با توجه به امکان بهرهگیری از پتانسیلهای طبیعی را برای طراحان بدون نیاز به دانش فنی محاسباتی برآورده میسازد.
|
کلیدواژه
|
پتانسیل تهویۀ طبیعی، درصد ساعات آسایش حرارتی، غلظت کربندیاکسید، نرخ تعویض هوا
|
آدرس
|
دانشگاه شهید بهشتی, دانشکده معماری و شهرسازی, ایران, دانشگاه شهید بهشتی, دانشکده معماری و شهرسازی, ایران, دانشگاه شهید بهشتی, دانشکده معماری و شهرسازی, ایران
|
پست الکترونیکی
|
m_tahsildoost@sbu.ac.ir
|
|
|
|
|
|
|
|
|
assessing the potential of natural ventilation in office spaces in terms of climate and interior design in province centers
|
|
|
Authors
|
|
Abstract
|
natural ventilation is one of the most important passive strategies to reduce building energy use, provide thermal comfort, and improve indoor air quality. it is one of the key solutions for sustainability in the building industry. on the other hand, natural ventilation is potentially dependent on climatic conditions and varies considerably from one region to another. this is while currently there is no information about this possibility in the country. therefore, the current research assessed the potential for ventilation for maximum use in different climate zones of iran in two parts and on two scales. first, the ventilation potential at the climate scale was evaluated based on weather data, and the maximum natural ventilation potential in 31 province centers was estimated by calculating the number of efficient hours for ventilation. in the second part, the effect of ventilation on improving thermal comfort and indoor air quality at the building scale was investigated. for this purpose, a module of an office building was modeled in rhino software, then some limitations were applied to the weather data (temperature, wind, and humidity) using the climate studio plugin. finally, the results were reported in the form of a map and by categorization. according to the results, the number of natural ventilation hours ranged from 1095 to 6158 hours, the percentage of comfort hours ranged from 33.15% to 50.32%, the percentage of hours with standard carbon dioxide concentration ranged from 10.89% to 50.16%, and the percentage of hours with a suitable air change rate also varied from 11.55% to 48.85%. based on this, the atlas of natural ventilation potential for indoor spaces in different climate zones of the country (limited to province centers) was prepared, which can be used in the design process, highlighting natural potentials without the need for computational technical knowledge.
|
Keywords
|
natural ventilation potential ,percentage of thermal comfort hours ,carbon dioxide concentration ,air change rate
|
|
|
|
|
|
|
|
|
|
|