lead-doped carbon ceramic electrode as a renewable surface composite electrode for the preparation of lead dioxide film and detection of l-tyrosine

Lead-doped carbon ceramic electrode as a new type of renewable composite electrode was prepared by mixing the lead powder with electrode matrix before gelation. pb on the electrode surface was then converted to lead dioxide by the potential scanning of the composite electrode in 0.1 m naoh solution in the range of − 0.3 to 0.7 v versus sce. the composition and morphology of the electrodes were studied by energy dispersive x-ray spectrometry, scanning electron microscopy, and atomic force microscopy techniques. cyclic voltammetry and chronoamperometry techniques were also used to study the electrocatalytic activity of the modified electrode toward the oxidation of the l-tyrosine. the best results were obtained at a working potential of 0.45 v (vs. sce) in 0.1 m naoh solution. the sensor exhibited a good linear response in the range of 5–1458 µm with a coefficient of determination of 0.9963. the detection limit was 0.77 µm, and sensitivity was 37.4 μa mm−1. in addition, the modified electrode showed high stability and interference-free response for to detection of the l-tyrosine.