dosimetry of critical organs in maxillofacial imaging with cone-beam computed tomography

Background: while the benefits of conebeam computed tomography (cbct) are well known in maxillofacial imaging, the use of this modality is not riskfree.objective: the aim of this study was to evaluate the exposure doses received by patients during maxillofacial imaging with cbct.methods: entrance surface dose (esd) was measured by using thermoluminescent dosimeters (tlds) attached to the eyes lids, parotid glands and thyroid of 64 patients in two imaging centers (a and b). phantom dosimetry was performed by a cylindrical polymethyl methacrylate (pmma) headsize phantom and an ionization chamber for different exposure parameters. newtom vgi and planmeca promax 3d cbct scanners were used at centers a and b, respectively.results: the mean esd of the eyes, parotid glands and thyroid were 2.57, 2.33 and 0.28 mgy in center a, 0.35, 2.11 and 0.37 mgy in center b, respectively. esd of the eyes revealed a significant difference in two centers; in center b, it was 86.4% lower than center a. in the phantom dosimetry, the measured doses of newtom vgi were 2.63 and 2.08 mgy, respectively by changing field of view (fov) size from 8×8 cm^2 (height × diameter) to 6×6 cm^2. for planmeca promax 3d, it ranged from 0.98 to 3.24 mgy depending on exposure parameters.conclusion: there is a wide range of radiation doses dependent on the units, patients and selected scan parameters. inappropriate selection of exposure settings, especially fov size, can seriously increase patient dose.