|
|
فاز دوم جابهجایی نانوذرهی طلا مبتنی بر afm در محیطهای مختلف مایع
|
|
|
|
|
نویسنده
|
طاهری معین
|
منبع
|
مكانيك سازه ها و شاره ها - 1402 - دوره : 13 - شماره : 1 - صفحه:137 -146
|
چکیده
|
کاربرد فلز طلا در فضانوردی، الکترونیک و در علوم پزشکی، سبب مورد توجه قرارگرفتن آن شده است. لذا بررسیهای ساختاری و انجام تغییرات برای بهبود خواص و یا برقراری چیدمانهای خاص اتمی در علوم نانو برای این فلز خاص صورت گرفته است. میکروسکوپ نیروی اتمی، از جمله ابزارهای پرکاربرد با اهداف ذکر شده، میباشد. لذا در این مقاله جابهجایی نانوذره طلا در طی منیپولیشن با استفاده از میکروسکوپ نیروی اتمی که از اهداف فاز دوم میباشد، در شرایط محیطی آب، پلاسما و متانول، مورد بررسی قرار گرفته است. بدینمنظور ابتدا فرآیند به صورت دوبعدی مدلسازی شده و نیروهای بین مولکولی واندروالس، نیروی الکترواستاتیک دولایه و آبپوشی در آن در نظر گرفته شدهاند. سپس، نمودارهای جابهجایی بت درنظر گرفتن نیروهای بین مولکول و محیطهای مورد مطالعه ترسیم شدهاند. در نهایت نیز طبق نتایج حاصل از شبیهسازی در محیطهای مختلف بیشترین جابهجایی نانوذرهی طلا در فاز دوم منیپولیشن، در محیط آب و کمترین مقدار در محیط پلاسما بوده است.
|
کلیدواژه
|
جابهجایی، نانوذرهی طلا، میکروسکوپ نیروی اتمی، نیروهای بین مولکولی، محیطهای مختلف مایع
|
آدرس
|
دانشگاه اراک, دانشکده فنی و مهندسی, گروه مهندسی مکانیک, ایران
|
پست الکترونیکی
|
m-taheri@araku.ac.ir
|
|
|
|
|
|
|
|
|
the second phase of gold nanoparticle manipulation based on afm in different liquid environments
|
|
|
Authors
|
taheri m.
|
Abstract
|
the use of gold metal in astronautics, electronics and medical sciences has led to its consideration. therefore, structural studies and changes have been made to improve the properties or establish special atomic arrangements in nanoscience for this particular metal. atomic force microscopy(afm) is one of the most widely used tools for these purposes. therefore, in this paper, the displacement of gold nanoparticles during manipulation using the atomic force microscopy, which is one of the objectives of the second phase, in the environmental conditions of water, plasma and methanol, has been investigated. for this purpose, the process is first modeled in two dimensions and the intermolecular forces of van der waals, the double layer force and the hydration force are considered. then, the displacement diagrams are drawn considering the forces between the molecule and the studied environments. finally, according to the simulation results in different environments, the highest displacement of gold nanoparticles in the second phase of manipulation was in water and the lowest in plasma.
|
|
|
|
|
|
|
|
|
|
|
|
|