|
|
energy use efficiency of strip tillage systems for corn silage production in middle anatolia
|
|
|
|
|
نویسنده
|
carman k. ,citil e. ,marakoglu t.
|
منبع
|
journal of agricultural science and technology - 2021 - دوره : 23 - شماره : 2 - صفحه:293 -306
|
چکیده
|
In this study, three different strip tillage applications were used as an alternative to conventional tillage (ct). while original strip-till (ost) machine made by the maschio gaspardo was used in one of the applications of the strip tillage, the other two machines [horizontal (mhst) and vertical (mvst) shaft rotary tillers] were modified and used in strip tillage. depending on the strip tillage application used, about 35–40% of soil surface was tilled. for the three applications, the penetration resistance and shear stress of soil ranged from 0.45 to 1.91 mpa and from 0.36 to 0.48 n cm^–2, respectively. the energy ratio, energy productivity, specific energy, net energy gain, and energy intensiveness were calculated. there were significant differences (p< 0.01) among the treatments in terms of various energy indices and corn silage yields. in the experiments with no hoeing, the silage yield ranged from 3,714 to 3,953 kg ha^–1; whereas, with hoeing, the yield increased, ranging from 3,964 to 4,952 kg ha^–1. the average net energy gain of corn silage production with and without hoeing applied was 156,155.68 and 131,037.75 mj ha^–1, respectively. energy use efficiency was the highest in the mhst method with hoeing. as a result, in terms of energy use efficiency, mhst (modified horizontal shaft strip-till system) method with hoeing can be suggested for use in the middle anatolian region.
|
کلیدواژه
|
corn silage yield ,energy balance ,energy ratio ,specific energy ,maize
|
آدرس
|
selçuk university, faculty of agriculture, department of agricultural machinery and technology engineering, turkey, selçuk university, faculty of agriculture, department of agricultural machinery and technology engineering, turkey, selçuk university, faculty of agriculture, department of agricultural machinery and technology engineering, turkey
|
پست الکترونیکی
|
marakoglu@selcuk.edu.tr
|
|
|
|
|
|
|
|
|
کار آیی مصرف انرژی در سامانه خاکورزی نواری برای تولید ذرت سیلویی در آناتولیا میانه
|
|
|
Authors
|
|
Abstract
|
در این پژوهش، کاربرد سه نوع خاکورزی نواری به عنوان جایگزین خاکورزی معمولی (CT ) بررسی شد. به این منظور، در یکی از تیمارهای خاکورزی نواری، دستگاه اصلی پشتهنواری ساخت Maschio Gaspardo (OST) به کار رفت ولی دو دستگاه دیگر یعنی خاکورز دوار با شافت افقی(MHST) وعمودی(MVST) با تغییراتی برای خاکورزی نواری استفاده شد. بسته به تیمار خاکورزی نواری، 4035% خاک سطحی ورز داده شد. برای این سه تیمار مقاومت فرو روی (penetration resistance) و تنش برشی خاک به ترتیب بین 45/0 تا 91/1 مگا پاسکال و بین 36/0 تا48/0 نیوتن بر سانتی متر مربع بود. سپس، برخه انرژی، بهره وری انرژی، انرژی ویژه، انرژی خالص به دست آ مده، و شدت انرژی محاسبه شد. از نظر نمایه های مختلف انرژی و عملکرد ذرت سیلویی تفاوت های معناداری (p< 0.01 ) بین تیمارهای مختلف وجود داشت. در تیمارهایی که بیلچه زنی (hoeing) نداشت عملکرد سیلویی بین 3714 و 3953کیلوگرم در هکتار بود ولی با بیلچه زنی عملکرد افزایش یافت و در محدوده 3964 تا 4952 کیلو گرم درهکتار بود. میانگین انرژی خالص به دست آمده از ذرت سیلویی با و بدون بیلچه زنی به ترتیب برابر 156155.68 MJ ha -1 و 131037.75 MJ ha -1 بود. کار آیی مصرف انرژی در روش های MHST همراه با بیلچه زنی بیشترین مقدار را داشت. بنا بر این، از نظر کارآیی مصرف انرژی، روش MHST (سامانه تغییر یافته خاک ورزی با خاکورزنواری دارای شافت افقی) همراه با بیلچه زنی را می توان برای استفاده در منطقه آناتولیای مرکزی پیشنهاد کرد.
|
Keywords
|
|
|
|
|
|
|
|
|
|
|
|