|
|
شبیه سازی انتشار دود برآمده از آتش سوزی در ساختمان های بلند مرتبه با استفاده از مدل سهبعدی تولید شده از دادههای کاداستر دوبعدی تفکیک آپارتمان
|
|
|
|
|
نویسنده
|
مختاری کرچگانی مجید ,طالعی محمد
|
منبع
|
علوم و فنون نقشه برداري - 1399 - دوره : 9 - شماره : 4 - صفحه:19 -37
|
|
|
چکیده
|
در اختیار داشتن مدل سهبعدی از ساختمانهای با تعداد طبقات بالا، در مواقع اضطراری همچون رخداد آتشسوزی، نقش بنیادی و راهبردی در مدیریت بحران و کاهش خسارات دارد. درحالیکه ایجاد مدل سهبعدی ساختمانهای بلند، همواره با کمبود اطلاعات موردنیاز روبرو بوده است، دادههای دوبعدی تفکیک آپارتمان، بهعنوان منبع باارزش، کمهزینهای و در دسترس میتواند مورداستفاده قرار گیرد. با بهکارگیری این دادهها و استفاده از ابزارهای مدلسازی سهبعدی، میتوان گامی موثر در تولید مدل سهبعدی ساختمانها، بهویژه ساختمانهای بلندمرتبه در شهرها برداشت. هنگام بروز آتشسوزی در ساختمان، دود یکی از عوامل اصلی تهدیدکننده سلامت افراد خواهد بود که حرکت و انتشار آن در قسمتهای گوناگون ساختمان، متاثر از شرایط طراحی داخلی و معماری ساختمان است. ازاینرو شبیهسازی رایانهای نحوه انتشار دود در ساختمان، تحت سناریوهای گوناگون، میتواند در هنگام بروز آتشسوزی، کمک شایانی در فرایند تصمیمگیری مدیران بحران و کاهش تلفات انسانی، ایفا نماید. در این تحقیق، ابتدا پلان دوبعدی یک ساختمان بلندمرتبه واقع در تهران، بهصورت خودکار از دادههای اخذشده از سامانه نقشههای تفکیکی اداره ثبت، ایجاد گردید. سپس با بهرهگیری از نرمافزار cityengine، مدل سهبعدی ساختمان با جزئیات مناسب تولید شد. درنهایت با بهکارگیری مدل سهبعدی ایجادشده، شبیهسازی انتشار دود در ساختمان موردنظر در هفت سناریو متفاوت، در نرمافزار pyrosim انجام گرفت. نتایج موید قابلیتهای مناسب مدل سهبعدی ساختهشده از دادههای دوبعدی تفکیک آپارتمان، برای شبیهسازی و تحلیل سناریوهای گوناگون انتشار دود در ساختمانهای بلند است.
|
کلیدواژه
|
ساختمان بلندمرتبه، مدیریت بحران، مدلسازی سهبعدی، گسترش دود آتشسوزی، Bim ,Cityengine ,Pyrosim
|
آدرس
|
دانشگاه صنعتی خواجه نصیرالدین طوسی, دانشکده مهندسی نقشه برداری, ایران, دانشگاه صنعتی خواجه نصیرالدین طوسی, دانشکده مهندسی نقشه برداری, ایران
|
پست الکترونیکی
|
taleai@kntu.ac.ir
|
|
|
|
|
|
|
|
|
Simulation of Smoke Emission from Fires in High-Rise Buildings Using the 3D Model Generated from 2-Dimensional Cadastral Data
|
|
|
Authors
|
Mokhtari M. ,Taleai M.
|
Abstract
|
Having a 3Dimensional model of highrise buildings can be used in disaster management such as fire cases to reduce casualties. The fundamental dilemma in 3D building modeling is the unavailability of suitable data sources. However, available cadastral 2D maps could be used as lowcost and attainable resources for 3D building modeling.Smoke will be a great threat to peoplechr('39')s health during a fire in a building and its movement and diffusion in different parts of the building are affected by the architectural design of the building. Computer simulation can be utilized to investigate smoke movement and its emanated toxic gases under various scenarios which can play a significant role in decision making during a fires incident event to reduce human casualties.In this research, at first, 2D cadastral maps of a highrise building located at Tehran were utilized to produce a 3D model of building with adequate details in CityEngine. Next, smoke emission in the building was simulated under seven scenarios, using PyroSim software. The twodimensional data of apartment separation is readily available and at the lowest cost. Using some tools and techniques in spatial information systems, making it possible to utilize this data to implement a threedimensional model of a building with details to simulate the spread of smoke from fires. The process adopted in this study made it possible to use a twodimensional floor plan to produce a threedimensional model of the building at the LoD4.The results confirm the appropriateness of the constructed 3D model to simulate smoke emission under various scenarios in the highrise building. This result shows the effect and importance of smoke transfer routes, both inside and outside the building, on the emission of toxic gases. The results show that ensuring that the ducts are closed is one of the factors controlling the spread of smoke to other floors. Flue gutters and ducts are among the most important routes for emitting smoke in highrise buildings. The simulation results of Scenario 4 show that 40 seconds after the start of the fire, the toxic fumes spread through the stairs at all top floors of the building.Although data from 2D cadastral maps can be used to create a threedimensional model of a building, these data have shortcomings. The part related to the texture of the map features is faced with a lack of information such as the thickness of the walls, the type of used materials, the exact location of the components (doors and windows) on the walls, and so on. These factors affect the smoke emission simulation results. As a result, development of a threedimensional model of the building containing more detailed information about the specifications and materials used in the walls and various parts of the building needs to be considered in future research.The smoke emission simulation results can also be used in a variety of applications, including emergency evacuation modeling in the event of a fire in a building, along with the inclusion of other information such as number and physical characteristics of residents in different parts of the building.
|
Keywords
|
High-Rise Buildings ,Disaster Management ,3D Modeling ,BIM ,Fire Smoke ,CityEngine ,PyroSim ,BIM ,CityEngine ,PyroSim
|
|
|
|
|
|
|
|
|
|
|