>
Fa   |   Ar   |   En
   بررسی حساسیت کناره رودخانه در برابر فرسایش و راهکارهای حفاظت کناره‌های کانال در رودخانه واز چمستان- مازندران  
   
نویسنده رستمی میلاد ,حسین زاده محمد مهدی ,اسماعیلی رضا
منبع پژوهشهاي دانش زمين - 1399 - دوره : 11 - شماره : 44 - صفحه:1 -14
چکیده    تغییرات مجرای رودخانه، فرسایش کناره ای و رسوبگذاری کناره ای، فرآیند های طبیعی رودخانه های آبرفتی هستند که باعث تخریب زمین های کشاورزی اطراف و خسارت به تاسیسات انسانی اطراف رودخانه می شود. در این پژوهش با استفاده از مدل تنش برشی لین میزان ضریب ناپایداری کناره رودخانه واز در استان مازندران بررسی شده است. بدین منظور کلیه پارامترهای مورد نیاز با استفاده از مطالعات میدانی، تصاویر گوگل ارث و آزمایش دانه بندی اندازه گیری شد. براساس مدل فوق مقاطع ناپایدار شناسایی سپس برای هر یک از این مقاطع، اندازه پاره سنگ جهت سنگچینی کناره رودخانه به عنوان راهکار مدیریتی تعیین شده است. نتایج نشان داد که مقاطع 6، 2، 8، 3، 5، 7، 1، 4 به ترتیب دارای بیشترین تا کمترین ضریب پایداری هستند. بر این اساس اندازه پاره سنگ در آستانه حرکت و پاره سنگ مناسب جهت سنگچینی کناره و حفاظت از کناره رودخانه متفاوت خواهد بود. همچنین با توجه به شرایط هر مقطع، شیب مناسب کناره جهت عملیات سنگچین کردن متفاوت می باشد. که در این بازه از رودخانه واز مقطع شماره 1 بزرگترین پاره سنگ با اندازه 1.21 متر در شیب 20 درجه و پاره سنگ با اندازه 0.69 متر در شیب 30 درجه مورد نیاز است. مقطع شماره 6 کوچکترین پاره سنگ با اندازه 0.248 در شیب 20 درجه و پاره سنگ با اندازه 0.115 متر در شیب 30 درجه مورد نیاز است.
کلیدواژه رودخانه واز، سنگچین کناره، ضریب پایداری، فرسایش کناره‌ای، مدل لین
آدرس دانشگاه شهید بهشتی, دانشکده علوم زمین, گروه جغرافیای طبیعی, ایران, دانشگاه شهید بهشتی, دانشکده علوم زمین, گروه جغرافیای طبیعی, ایران, دانشگاه مازندران, دانشکده علوم انسانی و اجتماعی, گروه جغرافیا, ایران
 
   Assessment of bank-river stability versus erosion and factors for its management strategy in the Vaz river, Mazandaran province  
   
Authors Hosseinzadeh Mohammad mehdi ,Esmaili Reza ,rostami milad
Abstract    IntroductionChanges in river channel, bank erosion and sedimentation are the natural processes in alluvial rivers which might destruct and damage surrounding human facilities and farms. Regarding this, the study of bankriver instability is done for engineering activities in order to form the necessary proceedings to stabilize the banks against erosion.Material and methodsIn this study using the Lin shear stress, the rate of instability coefficient has been investigated in the Vaz River in Mazandaran province. All the required parameters are assessed in geomorphology library using field surveys, google earth images and granometry. At first, a twokilometer reach is determined and eight cross sections were chosen in this reach. After that, to riprap the instable bank bed slope, shear stress, bank angle, stability coefficient and effective rock size of the Vaz River is defined as the management strategy. Discussion and resultsAfter measuring the parameters affecting the shear stress index of riverbanks in the Vaz River, the rate of bank stability, the rock size in the incipient motion and the effective rock size to riprap the river is estimated in two scenarios including 20° and 30° angles of slope. To determine the effective rock size the highest angle of repose and shields parameters are considered as 42 and 0.054, respectively. In phase two with hypothetical bank slope of 20° and 30°, the rock size in the sixth to ninth steps for different rock sizes are repeated constantly, since SF=1 was obtained. In this situation, the effective riprap rock size and the rock size in the incipient motion is estimated for the two suggested scenarios. Conclusions The results reveal that the sections 6, 2, 8, 3, 5, 7, 1, 4 have the most and least stability coefficients, respectively. Therefore, the suitable rock size to riprap the bank and protect the bankriver would be different from the size of rock in the incipient motion. Furthermore, considering the situation of each section, the suitable angle or the bank slope are different to riprap the bank. In the reach of the Vaz River in section 1 the coarsest required rock sizes are 1.21 m in 20° angle of slope and 0.69 m in a slope with 30° angle. In the section 6 the smallest required rock size is 0.248 m in 20° of slope and 0.115 m in 30 degree of slope.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved