>
Fa   |   Ar   |   En
   مدل رفتاری برای تخمین مقاومت بتن با استفاده از امواج فراصوت با در نظر گرفتن نسبت‌های اختلاط مصالح  
   
نویسنده صباغ رنانی مهدی ,کاظمی محمدتقی ,عسگری منصور
منبع مدل سازي در مهندسي - 1398 - دوره : 17 - شماره : 56 - صفحه:367 -374
چکیده    ارزیابی مقاومت بتن یکی از مسائل مهم در صنعت بتن و سازه‌های بتنی است. در اکثر موارد نمونه هایی تهیه شده از بتن در حین اجرا جدا شده و پس از عمل آوری طبق استانداردهای موجود تحت فشار تک محوره قرار می گیرند و بر اساس نیروی اعمالی، مقاومت بتن در سازه تعیین می‌شود. مقاومت حداقل بتن را می توان پیش بینی کرد و با دقت خوبی تخمین زد اما در موارد بسیاری به دلایلی نظیر عدم اجرای صحیح، مقاومت بتن سازه با بتن طرح متفاوت است. از جمله روش های پذیرفته شده برای اندازه گیری مقاومت بتن در محل نیز می توان به روش مغزه گیری اشاره کرد که روشی مخرب است. ارائه روشی غیرمخرب که بتواند مقاومت بتن در سازه را تخمین بزند می تواند در موارد زیادی راهگشا باشد. در این پژوهش با تهیه نمونه هایی بتنی با طرح اختلاط متفاوت ضمن بررسی تاثیر نسبت های اختلاط بر مقاومت بتن و سرعت موج فراصوت، رابطه ای بین مقاومت بتن و سرعت موج فراصوت ارائه گردیده است. همچنین با در نظر گرفتن نسبت آب به سیمان و نسبت سنگدانه ریز به درشت رابطه ای جامع برای تخمین مقاومت بتن ارائه شده است.
کلیدواژه بتن، مقاومت فشاری، سرعت امواج فراصوت، آزمون های غیرمخرب، طرح اختلاط
آدرس دانشگاه صنعتی شریف, دانشکده مهندسی عمران, ایران, دانشگاه صنعتی شریف, دانشکدۀ مهندسی عمران, ایران, دانشگاه آزاد اسلامی واحد نجف آباد, دانشکدۀ مهندسی عمران, ایران
پست الکترونیکی mansour.asgari@gmail.com
 
   Constitutive Model for Estimating Concrete Strength Using Ultrasonic Test Considering Mixing Ratios  
   
Authors Sabagh Renani Mehdi ,Kazemi Mohammad Taghi ,Asgari Mansour
Abstract    Evaluation of concrete strength is one of the important issues in the concrete industry and concrete structures. In most cases, during construction, samples of concrete are picked up and after curing, according to the existing standards, they are subjected to uniaxial compression and based on the applied force, the strength of the concrete is determined. Minimum strength of concrete can be predicted but in many cases, due to reasons such as lack of proper implementation, concrete strength in structure with design strength is different. Core drilling is one of the accepted insitu tests for measuring the strength of concrete that is a destructive method. Providing a nondestructive method that can estimate the strength of concrete in a structure in many cases is a remedial. In this research, by providing concrete samples with different mix design, in addition to studying the effect of mixing ratios on concrete strength and ultrasound wave velocity, a relationship between concrete strength and ultrasonic wave velocity is presented. Also, a comprehensive relationship is presented to estimate the strength of concrete considering water to cement ratio and the ratio of fine aggregate to course aggregate.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved