>
Fa   |   Ar   |   En
   Optimization of Machining Parameters using Taguchi Method for Surface Roughness  
   
نویسنده saravanakumar a. ,sasikumar p. ,nilavusri n.
منبع journal of materials and environmental science - 2016 - دوره : 7 - شماره : 5 - صفحه:1556 -1561
چکیده    For the present work,an experimental investigation is made on the effect of spindle speed,feed rate and wt% of alumina particle in reducing surface roughness during drilling of al6063/al2o3/gr hybrid composite. tin coated solid carbide drill bit of 6 mm diameter is used for drilling the composite. taguchi's experimental design concept is used for optimizing the design parameters with three levels for better surface finish. the experimental outcomes and microstructure of machined surface reveal that the drilled samples at lowest feed rate shows better performance on surface roughness. the wt% of alumina also has its influence on minimizing surface roughness followed by spindle speed while drilling the fabricated samples.
کلیدواژه Drilling; Surface roughness; Taguchi method
آدرس department of mechanical engineering,kpr institute of engineering and technology,coimbatore, India, department of mechanical engineering,kpr institute of engineering and technology,coimbatore, India, department of mechanical engineering,kpr institute of engineering and technology,coimbatore, India
 
     
   
Authors
  
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved