|
|
|
|
EFFECT OF HEAT INPUT ON THE STRUCTURE AND PROPERTIES OF ALUMINIUM WELDMENT
|
|
|
|
|
|
|
|
نویسنده
|
Gulshan F. ,Ahsan Q.
|
|
منبع
|
iranian journal of materials science and engineering - 2013 - دوره : 10 - شماره : 2 - صفحه:11 -18
|
|
چکیده
|
The probable reasons for evolution of weld porosity and solidification cracking and the structure- property relationship in aluminium welds were investigated. aluminium plates (1xxx series) were welded by tungsten inert gas (tig) welding process, 5356 filler metal was used and heat input was controlled by varying welding current (145a, 175a and 195a). the welded samples were examined under optical and scanning electron microscopes and mechanical tests were performed to determine tensile and impact strengths. secondary phase, identified as globules of mg2al3 precipitates, was found to be formed. solidification cracking appeared in the heat affected zone (haz) and porosities were found at the weld portion. the tendency for the formation of solidification cracking and weld porosities decreased with increased welding current.
|
|
کلیدواژه
|
Aluminium ,TIG welding ,welding current ,secondary phase ,porosity ,solidification cracking
|
|
آدرس
|
Bangladesh University of Engineering and Technology, Materials and Metallurgical Engineering Department, Bangladesh, University Teknikal Malaysia, Faculty of Manufacturing Engineering, Engineering Materials Department, Malaysia
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Authors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|