Optimization of Hot Workability in Ti-IF Steel by Using the Processing Map

Processing map for hot working of ti-if steel has been developed in the temperature range of 750 to 1100 °cand strain rate of 0.01 to 100 s-1. this map in the austenite region exhibits a single domain with a peak efficiencyof 45% occurring at 1025 °c and strain rate of 0.02 s-1. the domain extends over the temperature range of 1000to 1100 °c and strain rate range of 0.01 to 1 s-1. the true stress-strain curves and microstructural observationsshows the occurrence of dynamic recrystallization in this domain. in two phase regions, where austenite andferrite are present together, flow localization occurs in the form of bands with a fine grained structure as a resultof dynamic recrystallization in the bands. these deformation bands are formed at 45° with respect to axialdirection of compression. the processing map in ferrite region exhibits a domain with a peak efficiency of 38%occurring at 825 °c and strain rate of 0.02 s-1, so this domain extends over the temperature range of 800 to 850°c and strain rate range of 0.01 to 0.5 s-1. the true stress-strain curves and microstructural results confirm theoccurrence of partially dynamic recrystallization in this domain.