>
Fa   |   Ar   |   En
   بررسی تغییرات سرعت در کانال مرکب مستطیلی نامتقارن مستقیم با استفاده از نرم افزار flow-3d  
   
نویسنده حاجی پور مسعود ,بهدارروندی عسکر مهدی ,پارسی احسان ,انصاری قوجقار محمد
منبع مهندسي آبياري و آب - 1401 - دوره : 13 - شماره : 49 - صفحه:1 -16
چکیده    در این تحقیق، جریان درون کانال مرکب مستطیلی، با روش عددی حجم محدود مورد مطالعه قرار گرفت که بدین منظور از نرم افزار flow3d استفاده شد. با مقایسه ی نتایج مدل عددی با نتایج آزمایشگاهی نتیجه گرفته شد که مدل عددی بخوبی می تواند جریان درون کانال مرکب مستطیلی را شبیه سازی کند. با انجام مدل سازی های عددی شرایط مرزی مناسب، مش بندی با ابعاد مورد نظر و مدل مناسب آشفتگی برای توصیف هیدرولیک جریان درون کانال مرکب مستطیلی بدست آمد. سه مدل آشفتگی دو معادله ای kε، rng kε و kω و یک مدل آشفتگی گردابه های بزرگ les مورد استفاده قرار گرفت. همچنین اثر پارامترهای هندسی و جریان بر میزان سرعت متوسط در کانال مرکب بررسی شد. نتایج بدست آمده از این تحقیق نشان می دهد که با افزایش عرض سیلاب دشت در عمق های مختلف سرعت جریان کاهش یافته است، به طوری که در مقدار 75/0=(yf/h)، با کاهش عرض سیلاب دشت سمت راست از 71/5 به 33/13 سانتیمتر نسبت سرعت جریان در مقطع کانال اصلی به سرعت متوسط نیز 51 درصد افزایش یافته است. لازم به ذکر است که با افزایش عمق سیلاب دشت سرعت جریان کاهش یافته است. همچنین با افزایش ارتفاع دیواره کانال اصلی سرعت جریان کاهش می یابد.
کلیدواژه دشت سیلابی، کانال مرکب مستطیلی، کانال اصلی، نرم افزار flow3d
آدرس دانشگاه علوم و فنون دریایی خرمشهر, گروه عمران سازه‌های دریایی, ایران, دانشگاه علوم و فنون دریایی خرمشهر, دانشکده مهندسی, گروه عمران سازه‌های دریایی, ایران, شرکت مهندسین مشاور آب و انرژی اروند, ایران, دانشگاه تهران، پردیس کشاورزی و منابع طبیعی, گروه مهندسی آبیاری و آبادانی, ایران
پست الکترونیکی ansari.ghojghar@ut.ac.ir
 
   investigation of velocity changes in a straight asymmetric rectangular composite channel using flow-3d software  
   
Authors hajipour masoud ,behdarvandi mehdi ,parsi ehsan ,ansari ghojghar mohammad
Abstract    in this study, the flow inside a rectangular composite channel was studied by finite volume numerical method, for which flow3d software was used. comparing the results of the numerical model with the laboratory results, it was concluded that the numerical model can well simulate the flow inside a rectangular composite channel. performing numerical modeling of suitable boundary conditions, a grid with the desired dimensions and a suitable turbulence model was obtained to describe the hydraulic flow inside the rectangular composite channel. three turbulence models of the two equations kε, rng kε and kω and one turbulence model of large vortices les were used. also, the effect of geometric parameters and flow on the average velocity in the composite channel was investigated. the results obtained from this study show that with increasing the width of the floodplain at different depths, the flow velocity has decreased, so that in the value of = 0.75 (yf / h), with decreasing the flood width of the right plain from 5.71 to 13.33 cm, the ratio of flow velocity in the section of the main channel to the average velocity has also increased by 51%. it should be noted that with increasing the depth of the floodplain, the flow velocity has decreased. also, with increasing the height of the main channel wall, the flow velocity decreases.
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved