The impact of plasma treatment of Cercon® Zirconia Ceramics on adhesion to resin composite cements and surface properties

Introduction: in recent years,the use of ceramic base zirconia is considered in dentistry for all ceramic restorations because of its chemical stability,biocompatibility,and good compressive as well as flexural strength. however,due to its chemical stability,there is a challenge with dental bonding. several studies have been done to improve zirconia bonding but they are not reliable. the purpose of this research is to study the effect of plasma treatment on bonding strength of zirconia. methods: in this in vitro study,180 zirconia discs' (thickness was 0.85-0.9 mm) surfaces were processed with plasma of oxygen,argon,air and oxygen-argon combination with 90-10 and 80-20 ratio (n=30 for each group) after being polished by sandblast. surface modifications were assessed by measuring the contact angle,surface roughness,and topographical evaluations. cylindrical panavia f2 resin-cement and diafill were used for microshear strength bond measurements. the data analysis was performed by spss 20.0 software and one-way analysis of variance (anova) and tukey test as the post hoc. results: plasma treatment in all groups significantly reduces contact angle compare with control (p = 0.001). topographic evaluations revealed coarseness promotion occurred in all plasma treated groups which was significant when compared to control (p < 0.05),except argon plasma treated group that significantly decreased surface roughness (p < 0.05). in all treated groups,microshear bond strength increased,except oxygen treated plasma group which decreased this strength. air and argon-oxygen combination (both groups) significantly increased microshear bond strength (p < 0.05). conclusion: according to this research,plasmatic processing with dielectric barrier method in atmospheric pressure can increase zirconia bonding strength.