optimizing hybrid photocatalytic-ozonation for offshore produced water treatment

Offshore produced water (opw), a type of wastewater rich in hazardous compounds such as polycyclic aromatic hydrocarbons (pahs), requires effective treatment. this study presents a novel methodology utilizing tio2 nanoparticles, ultraviolet (uv) lamps, and ozonation for the degradation of phenanthrene (phe) from opw. various factors including uv lamp power (10w-50w), ozone dose (0.1 mg/l-0.5 mg/l), tio2 concentration (0.5 g/m²-2.1 g/m²), ethanol fraction (25%-85%), ph (4.5-10.5), phe initial concentration (5 mg/l-25 mg/l), and treatment time (15 min-45 min) were systematically investigated to understand their impact on pah degradation in the opw. the study employs response surface methodology (rsm) for modeling and optimizing phe removal efficiency. the results contribute to the development of a mathematical model, and through optimization, optimal conditions are proposed to maximize phe removal efficiency. experimental implementation of the optimized conditions in a physical model resulted in an impressive 98% phe removal efficiency. the identified optimal conditions include uv lamp power of 40 w, ozone dose of 0.5 mg/l, tio2 concentration of 2 g/m², ethanol fraction of 25%, ph of 5.2, initial phe concentration of 15 mg/l, and a treatment time of 40 min. this optimized approach provides valuable insights for efficient and environmentally friendly treatment of pahs in opw, emphasizing on the potential for practical application in soil washing effluent treatment.