Mechanical properties prediction for cold-formed steel angle connection with various flange cleat thickness

Connection is an important element in structural steelwork construction. eurocode does not provide adequate design information for mechanical properties prediction of top-seat flange cleat connection,especially for thin-walled cold-formed steel structures. adopting hot-rolled design with neglecting thin-walled behaviour could lead to unsafe or uneconomic design. this research aims to provide accurate mechanical properties prediction for bolted top-seat flange cleat connection in cold-formed steel structures. the scope of work focuses on the effect of various thickness of the flange cleat to the rotational stiffness and strength behaviour of a beam-to-column connection. experimentally verified and validated finite element modelling technique is applied in the parametric investigation. two categories of flange cleat thickness,ranged from 2 mm to 40 mm are studied. from the developed numerical models,it is observed that eurocode has overestimated the initial rotational stiffness prediction,calculated with component method. the over-estimation would influence the overall stiffness of structures and force distribution within the components. as a conclusion,a set of newly proposed accurate predictions for initial rotational stiffness and strength of cold-formed steel top-seat flange cleat connection,with the influence of the thickness of flange cleat is presented. © 2015 penerbit utm press. all rights reserved.