>
Fa   |   Ar   |   En
   Optimization of supercritical carbon dioxide extraction of quercus infectoria oil  
   
نویسنده salleh l.m. ,abel s.e.r. ,zahedi g. ,rahman r.a. ,nasir h.m. ,faua'ad s.a.s.
منبع jurnal teknologi - 2015 - دوره : 74 - شماره : 7 - صفحه:79 -86
چکیده    This current study focuses on the modelling and optimization of supercritical fluid extraction of quercus infectoria galls oil. in this case,response surface methodology (rsm) and artificial neural network (ann) were applied for the modelling and prediction of extraction yield of galls oil. a 17-run box-behnken design (bbd) was employed to statistically optimize the process parameters of sc-co2 extraction of quercus infectoria galls at a condition as follows: pressure (5000,6000,7000 psi),temperature (40,50,60°c) and extraction time (30,45,60 min). the maximum yield of the extracted oil is1.12 % and the optimum conditions are at an extraction pressure of 5574 psi; extraction temperature of 75°c and extraction time of 54 min. under the optimal conditions,the experimental results agree with the predicted values obtained through analysis of variance (anova). this indicates a successful response surface methodology and highly satisfactory goodness of fit of the model used. the analysis of experimental design for process optimization results demonstrates that temperature and extraction time are the main parameters that influence the oil extraction of quercus infectoria. © 2015 penerbit utm press. all rights reserved.
کلیدواژه Artificial neural network; Optimization; Quercus infectoria(Manjakani); Response surface methodology (RSM); Supercritical CO2 extraction
آدرس centre of lipids engineering and applied research (clear),ibnu sina institute for scientific and industrial research,faculty of chemical engineering,universiti teknologi malaysia,utm johor bahru,johor,malaysia,department of bioprocess engineering,faculty of chemical engineering,universiti teknologi malaysia,utm johor bahru, Malaysia, department of bioprocess engineering,faculty of chemical engineering,universiti teknologi malaysia,utm johor bahru, Malaysia, process system engineering centre (prospect),faculty of chemical engineering,universiti teknologi malaysia,utm johor bahru, Malaysia, Universiti Putra Malaysia, Malaysia, centre of lipids engineering and applied research (clear),ibnu sina institute for scientific and industrial research,faculty of chemical engineering,universiti teknologi malaysia,utm johor bahru, Malaysia, centre of lipids engineering and applied research (clear),ibnu sina institute for scientific and industrial research,faculty of chemical engineering,universiti teknologi malaysia,utm johor bahru,johor,malaysia,department of bioprocess engineering,faculty of chemical engineering,universiti teknologi malaysia,utm johor bahru, Malaysia
 
     
   
Authors
  
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved