>
Fa   |   Ar   |   En
   The Effect of Ball Milling Process on Sintering and Densification Enhancement of W-Bronze Composites  
   
نویسنده Mohammed Kahtan Sadiq ,Rahmat Azmi ,Ahmad Khairel Rafezi
منبع jurnal teknologi - 2012 - دوره : 59 - شماره : 2 - صفحه:133 -136
چکیده    Τhe miscibility of w in sn and cu is extremely poor. the wettability of w by those two elements is limited. to tackle this problem, two step ball milling process of the w–bronze elemental powders was proposed in this study. the softness of sn in the first step was exploited to modify the surface morphology of the w particles. in the second step cu was added to the ball milled mixture. to achieve this goal, two different sets of w50wt. %–pre mix bronze compacts of ball milled and of as received powders were utilized. sintering process was performed at 1150°c. the two–step ball milled powders yielded sintered compacts of fine polygonal and homogeneous w network skeletal dispersed in bronze matrix. sintered compacts of about 95% theoretical density were produced by this technique.
کلیدواژه Metal matrix composites; mechanical alloying; sintering; microstructure; scanning electron microscopy
آدرس Universiti Malaysia Perlis, Malaysia, Universiti Malaysia Perlis, School of Materials Engineering, Malaysia, Universiti Malaysia Perlis, School of Materials Engineering, Malaysia
 
     
   
Authors
  
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved