|
|
|
|
External Hard Particle Size Effect on Changes in Frictional Performance and Grit Embedment during Drag and Stop Mode Braking
|
|
|
|
|
|
|
|
نویسنده
|
Abdul Hamid M. K. ,Abu Bakar A. R. ,Stachowiak G. W.
|
|
منبع
|
jurnal teknologi - 2014 - دوره : 66 - شماره : 3 - صفحه:65 -73
|
|
چکیده
|
The effects of silica sand of 50-180 μm, 180-355 μm and 355-500 μm on friction performance and grit embedment at brake disc and pad interface was investigated. results showed that present of external hard particles caused higher friction coefficient due to higher number of smaller particles involved in mixing and changing the effective contact, while good friction stability was attributed to smaller grit particles and compacted wear debris. grit embedment was greatly dependent on presence of compacted wear debris as most grits were embedded into compacted wear debris with embedment of 0.8% was observed for 50-180 μm, 2% for 180-355 μm and 3% for 355-500 μm.
|
|
کلیدواژه
|
External hard particle; friction coefficients; particle size; grit embedment
|
|
آدرس
|
Universiti Teknologi Malaysia, Faculty of Mechanical Engineering, Malaysia, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering, Malaysia, University of Western Australia, School of Mechanical and Chemical Engineering, Tribology Laboratory, Australia
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Authors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|