Half-panda ring resonator used to generate 100 MHZ repetition rate femtosecond soliton

Interferometric measurement techniques have been employed in research and industry for investigations into propagation behavior aspects of the optical solitons within semiconductor lasers. the half-panda ring resonator system introduced in this paper consists of an add/drop multiplex connected to a microring resonator on the right side,where the output powers can be controlled by specific parameters. the collision of dark and bright solitons occurs inside the system in which femtosecond (fs) optical solitons with 100 mhz repetition rate form the through and drop port outputs of the system. a trapping force is produced via the add port signals that constitute the input powers; thus the femtosecond optical soliton are generated and controlled within the half-panda ring resonator. the results of the soliton signals are obtained based on the iterative method technique in which a number of experimental and practical parameters are employed. these circumstances allow for manipulation of the trapping bandwidth by means of system parameter alterations. the input powers of the dark and bright solitons are 5.12 mw and 4 mw respectively. the full width at half maximum (fwhm) of the through and drop port output signals are 35 and 76 femtoseconds respectively correspond to 0.76 and 1.56 terahertz (thz) in frequency domain,where the repetition rate of the solitons is 100 mhz. © 2016 penerbit utm press. all rights reserved.