>
Fa   |   Ar   |   En
   مبدل اصلاح ضریب توان باک و فوروارد فلای‌بک با اعوجاج هارمونیکی پایین  
   
نویسنده غزلی مسعود ,ادیب احسان
منبع هوش محاسباتي در مهندسي برق - 1398 - دوره : 10 - شماره : 3 - صفحه:1 -10
چکیده    در این مقاله یک مبدل اصلاح ضریب توان تک‌مرحله‌ای جدید ارائه می‌شود. در طبقه ورودی این ساختار، از مبدل باک برای اصلاح ضریب توان استفاده می‌شود؛ درنتیجه، مشکل استرس ولتاژ خازن ذخیره‌ساز انرژی، یکی از مشکلات مبدل‌های اصلاح ضریب توان تک‌مرحله‌ای، در این مبدل برطرف شده است. این مدار، علاوه بر داشتن مزیت استرس ولتاژ پایین روی خازن ذخیره‌ساز انرژی، مشکل اعوجاج گذر از صفر نیز ندارد و اعوجاج هارمونیکی جریان ورودی بسیار پایین است. اعوجاج هارمونیکی بالا دراثر زاویه مرده گذر از صفر در ساختارهای مبتنی بر مبدل اصلاح ضریب توان باک ایجاد می‌شود که در این ساختار پیشنهادی با سیم‌پیچ کمکی فوروارد حذف شده است. همچنین، قسمتی از توان ورودی به‌صورت مستقیم به خروجی ارسال شده است که بهبود راندمان را سبب می‌شود. مبدل پیشنهادی تحلیل شده و درستی راهکار پیشنهادی در قالب تحلیل‌های نظری و نتایج شبیه‌سازی و عملی اثبات شده است.
کلیدواژه اصلاح ضریب توان، مبدل‌های اصلاح ضریب توان تک‌مرحله، مبدل باک
آدرس دانشگاه صنعتی اصفهان, دانشکده مهندسی برق و کامپیوتر, ایران, دانشگاه صنعتی اصفهان, دانشکده مهندسی برق و کامپیوتر, ایران
پست الکترونیکی e.adib@cc.iut.ac.ir
 
   BuckForwardFlyback Power Factor Correction Converter with Low Total Harmonic Distortion  
   
Authors Ghazali Masoud ,Adib Ehsan
Abstract    In this paper, a new singlestage power factor correction (PFC) converter is presented. In the input stage of this structure, a buck converter is used to correct the power factor. So, the voltage stress of bulk capacitor reduced, and one of the main problems in the single stage PFC converters is solved. Moreover, by employing a compensator circuit, the input current dead angle which is the main drawback of the existing buck type PFCs is obviated, thus the total harmonic distortion is very low. In converters with buck PFC, input current dead angle results in high THD. In the proposed converter, using an inductor coupled with the main transformer, this problem is solved. A part of input power is transmitted directly to the output that helps to improve efficiency. The proposed converter is analyzed and the validity of the proposed solution is proven in the form of theoretical analysis, simulation and practical results.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved