|
|
ارائه روش جدید کنترلی مبتنی بر مد لغزشی برای ردیابی نقطه حداکثر توان تولیدی مولدهای فتوولتائیک
|
|
|
|
|
نویسنده
|
صوفی محمد ,حاتمی علیرضا
|
منبع
|
هوش محاسباتي در مهندسي برق - 1398 - دوره : 10 - شماره : 4 - صفحه:1 -14
|
|
|
چکیده
|
در سالهای اخیر، استفاده از مولدهای فتوولتائیک برای تولید انرژی الکتریکی گسترش زیادی یافته است. یکی از موضوعات مهم، بهرهبرداری از مولدهای فتوولتائیک در نقطه حداکثر توان تولیدی است. با توجه به مشخصه غیرخطی ولتاژ جریان سلولهای خورشیدی، برای دستیابی به نقطه حداکثر توان تولیدی، لازم است پارامترهای مختلف تاثیرگذار بر شاخصههای ولتاژ و جریان کنترل شوند. در این مقاله، کنترلکننده غیرخطی مد لغزشی برای بهرهبرداری مولد فتوولتائیک در نقطه حداکثر توان تولیدی ارائه میشود. سطح لغزش بهصورت مشتق توان نسبت به ولتاژ تعریف میشود و سیگنال کنترلی اعمالی به سیستم با توجه به سطح لغزش انتخابشده استخراج میشود. سپس پایداری کنترلکننده مد لغزشی مولد با استفاده از روش لیاپانوف اثبات میشود؛ درنهایت، شبیهسازیهای عددی برای اغتشاشهای مختلف در نرمافزار matlab صورت میگیرند و عملکرد روش پیشنهادی با روش اغتشاش و مشاهده مقایسه میشود. نتایج، موثربودن عملکرد روش پیشنهادی را نسبت به روش اغتشاش و مشاهده بیان میکنند.
|
کلیدواژه
|
ردیابی نقطه حداکثر توان، کنترل مد لغزشی، مولد فتوولتائیک، انرژی تجدیدپذیر
|
آدرس
|
دانشگاه بوعلی سینا, دانشکده مهندسی, گروه برق, ایران, دانشگاه بوعلی سینا, دانشکده مهندسی, گروه برق, ایران
|
پست الکترونیکی
|
hatamisharif@basu.ac.ir
|
|
|
|
|
|
|
|
|
Presenting a New Sliding Mode Control Method for Maximum Power Point Tracking of PV Generators
|
|
|
Authors
|
Hatami Alireza ,Soofi Mohammad
|
Abstract
|
In recent years, the use of photovoltaic generators for the production of electrical energy has become widespread. One of the important issues is the utilization of photovoltaic generators at the maximum output power point, considering the nonlinear voltagecurrent characteristic of solar cells, is that various parameters affecting the voltage and current characteristics need to be controlled to reach the maximum output power point. This paper presents a nonlinear sliding mode controller for photovoltaic generator operation at the maximum output power point. The sliding surface is defined as the derivative of power with respect to the voltage, and the applied control signal to the system is extracted depending on the selected slide surface. The stability of proposed controller is proved using Lyapunov Method. Finally, numerical simulations are performed for different perturbations in MATLAB software and the performance of the proposed method is compared with the perturbation and observation methods. The results show the effectiveness of the proposed method as compared with the conventional perturbation and observation approaches.
|
Keywords
|
|
|
|
|
|
|
|
|
|
|
|