>
Fa   |   Ar   |   En
   کنترل ولتاژ شبکه هوشمند به روش سلسله‌مراتبی و توزیع‌شده برخط  
   
نویسنده سبحانی حسین ,حسنوند سعید ,دوستی‌زاده میثم
منبع مهندسي برق دانشگاه تبريز - 1399 - دوره : 50 - شماره : 4 - صفحه:1613 -1625
چکیده    در این مقاله، یک راه‌کار بهینه و هماهنگ برای تنظیم برخط ولتاژ شبکه‌های هوشمند که دارای ترانسفورماتور تپ‌چنجری و منابع تولید پراکنده انرژی هستند، تبیین شده‌است. راه‌کار پیشنهادی نقاط کار توان راکتیو مولدهای پراکنده و همچنین موقعیت تپ ترانسفورماتور تپ‌چنجری را به‌صورت سلسله‌مراتبی تعیین می‌کند. در مرحله اول، با اجرای روش زیرگرادیان توزیع‌شده تابع تلفات توان باتوجه‌به قیود محدودیت ولتاژ کمینه می‌شود تا توان راکتیو بهینه مولدهای پراکنده یافته شود. درصورت عدم موفقیت مرحله اول برای تنظیم ولتاژ در محدوده مجاز، در مرحله دوم موقعیت تپ ترانسفورماتور تپ‌چنجری به‌طور بهینه تغییر می‌کند. راه‌کار پیشنهادی به‌وسیله تغییرات ناگهانی در وضعیت بار و سطح تولید توان اکتیو مولدهای پراکنده ارزیابی می‌شود. شبکه نامتعادل تست 123 باسه انجمن مهندسین برق و الکترونیک برای اعتبارسنجی روش پیشنهادی استفاده می‌شود. پاسخ‌دهی سریع، پاسخ‌گویی به‌ازای تغییر شدید و ناگهانی در شرایط بهره‌برداری و کاهش تعداد دفعات تغییر تپ از نتایج شبیه‌سازی استنتاج شد. همچنین نتایج حالت ماندگار مشابه با الگوریتم متمرکز نقطه میانی، توانایی و کارایی راه‌کار پیشنهادی را نشان داد.
کلیدواژه کنترل توزیع‌شده، کنترل سلسله‌مراتبی، کنترل برخط ولتاژ، شبکه هوشمند
آدرس دانشگاه فنی و حرفه‌ای استان یزد, دانشکده شهید صدوقی, دپارتمان مهندسی برق, ایران, مرکز آموزش عالی فیروزآباد, گروه مهندسی برق, ایران, دانشگاه لرستان, دانشکده فنی و مهندسی, گروه مهندسی برق, ایران
پست الکترونیکی doostizadeh.me@lu.ac.ir
 
   Voltage Control of Smart Grid by an Online Hierarchical Distributed method  
   
Authors Sobhani H. ,Hasanvand S. ,Doostizadeh M.
Abstract    In this paper, an online optimal coordinated solution for the voltage regulation of a distribution smart grids including an onload tap changer (OLTC) and multiple distributed generators (DG) is presented. The proposed strategy sets reactive power points of distributed generators as well as tap position of the OLTC hierarchically. In the first stage, a distributed subgradient method in order to find the optimal reactive powers for the DGs is implemented to minimize the power losses subject to voltage limits. If the first stage could not regulate voltage profile inside acceptable limits, in the second stage tap position of the OLTC will change optimally. The proposed solution is verified by studying suddenly load change and DGs’ active power output. An IEEE 123bus unbalanced test system is used for the verification of the proposed method. Fast response, responsibility to different suddenly changes in the operating condition, and reduction in the number of needed taps are the results of this study. Moreover, analogous steady state results in comparison with another centralized method i.e. interior point algorithm demonstrate the ability and efficiency of the proposed solution.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved