>
Fa   |   Ar   |   En
   طراحی کنترل‌کننده چندگانه برای سیستم‌های غیرخطی با استفاده از یک روند بهبود یافته انتخاب مدل‌های محلی نامی  
   
نویسنده احمدی مهدی
منبع مجله مهندسي مكانيك دانشگاه تبريز - 1401 - دوره : 52 - شماره : 2 - صفحه:251 -259
چکیده    این مقاله بر انتخاب مدل‌های محلی نامی در روش مدل‌های چندگانه برای سیستم‌های غیرخطی متمرکز است و از ابزار gap metric برای اندازه‌گیری فاصله بین مدل‌های خطی استفاده می‌شود. همچنین به منظور تجزیه سیستم غیرخطی به تعداد کمتری از مدل‌های محلی نامی، دو مرحله تجزیه و طراحی کنترل‌کننده‌های محلی با یکدیگر یکپارچه می‌شوند. کنترل‌کننده‌های محلی طراحی شده در زیرناحیه‌های ابتدایی می‌توانند برای زیرناحیه‌های آتی موثر باشند در حالیکه در روش‌های مبتنی بر جستجوی متوالی این موضوع نادیده گرفته می‌شود و لذا این روش‌ها از افزونگی کنترل‌کننده‌های محلی و متناظراً پیچیدگی کنترل‌کننده نهایی رنج می‌برند. بدین‌ترتیب با در نظر گرفتن تاثیر کنترل‌کننده‌های محلی طراحی شده در زیرناحیه‌های قبل، روند انتخاب مدل‌های محلی نامی در روش مبتنی بر جستجوی متوالی بهبود یافته و تعداد کنترل‌کننده‌های محلی به صورتی چشم‌گیر کاهش ‌می‌یابد. برای بررسی عملکرد روش ارائه شده، سیستم ph که یک سیستم شدیداً غیرخطی است مورد مطالعه واقع می‌شود. نتایج شبیه‌سازی نشان می‌دهد که عملکرد کنترل‌کننده نهایی در ردیابی ورودی مرجع و دفع اثر اغتشاش مناسب است در حالیکه تعداد کنترل‌کننده‌های محلی در مقایسه با روش جستجوی متوالی به نصف کاهش می‌یابد.
کلیدواژه بانک مدل‌های محلی نامی، سیستم غیرخطی، کنترل‌کننده‌ چندگانه، معیار فاصله، یکپارچه‌سازی پایداری و عملکرد حلقه بسته
آدرس مجتمع آموزش عالی فنی و مهندسی اسفراین, دانشکده مهندسی برق, ایران
پست الکترونیکی mahdiahmadi@esfarayen.ac.ir
 
   multi-model control of nonlinear systems using an improved procedure for nominal local models selection  
   
Authors ahmadi mahdi
Abstract    this paper is focused on selecting of nominal local models (nlms) to design the multi-model based controller for nonlinear systems. also gap metric is used as a powerful tool to measure the distance between local linear models. in order to decompose the nonlinear system into smaller number of nlms, selecting of nlms and designing the local controllers are integrated. the designed local controllers for the primary sub-regions may be able to stabilize other local models of the next sub-regions while the traditionalsuccessive search methods disregard the efficacy of the former nlms and corresponding local controllers. therefore, these methods suffer from the redundancy problem and complexity of the multi-model controller. it is shown that improving of nlms selection procedure by considering the efficacy of local controllers in the entire operating range can intensely reduce the number of nlms and local controllers. therefore, improving the decomposition procedure, screening the efficacy of the local controllers in the entire operating range, and reducing the number of local controllers are the main advantages of the proposed decomposition procedure in this paper. to evaluate the effectiveness of the proposed method, a highly nonlinear process, ph neutralization, is simulated. the results prove the effectiveness of the proposed method in set-point tracking and disturbance rejection while the number of nlms is half in comparison to other traditional successive search methods.
Keywords gap metric ,integrating closed-loop stability and performance ,multi-model controller ,nominal local models bank ,nonlinear system
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved