The Effect of Thixoforming Process on the Microstructures and Mechanical Properties of Al-Si-Cu-Mg Alloy

Forming of metals in their semi-solid state is one of the options for producing near net shape parts. it can produce a strong and highly reliable product. al-si-cu-mg casting alloy is commonly used in automotive engine components which is now widely used in the semi-solid processing. the main physical properties of the aluminium alloy and alloying element content such as silicon, copper and magnesium, plays an important role in determining the mechanical properties of the alloy. in this paper, the effect of the formation process of al-si-cu-mg permanent die casting alloy and the thixoforming process has been investigated towards the evolution of microstructure and mechanical properties. compound phases, shapes and morphology of the two processes were compared. the porosity effect was examined at permanent die castings and thixoforming process. the result of image analysis showed significant change of the thixoforming process of α- aluminum solid phase structure in spherical shape. size and morphology, as well as the uniformity of the silicon eutectic phases and intermetallic compound distributions of al2cu, al5fe si and al15(mn, fe)3si2 changed due to the compression during thixoforming process. thixoforming process of the al-si-cu-mg alloy exhibit the lowest percentage and microporosity area thus proved that porosity issue significantly reduced during the aluminium alloy solidification process in thixoforming process . the tensile properties of thixoformed alloy improved significantly with its ultimate tensile strength, yield strength, and elongation to fracture at 193mpa, 163mpa and 1.6%,respectively.