>
Fa   |   Ar   |   En
   The Effect of Various Parameters on Out-Of-Phase Thermo-Mechanical Fatigue Lifetime of A356.0 Cast Aluminum Alloy  
   
نویسنده Azadi M. ,Farrahi G. H. ,Winter G. ,Eichlseder W.
منبع International Journal Of Engineering - 2013 - دوره : 26 - شماره : 12 - صفحه:1461 -1470
چکیده    In this paper, the effect of various parameters on the out-of-phase thermo-mechanical fatigue (op-tmf) lifetime of the a356.0 cast aluminum alloy is investigated. studied parameters include the maximum temperature, the dwell time, and the thermo-mechanical loading factor. op-tmf tests are conducted considering realistic running conditions of diesel engine cylinder heads. the maximum temperature varies between 200 to 275°c and the thermo-mechanical loading factor, which is the ratio of the mechanical strain to the thermal strain, is considered between 75 to 150%. the dwell time (or the holding time) changes between 5 to 180 sec. at the maximum temperature. fracture surfaces of specimens are studied using the scanning electron microscopy (sem). these sem images reveal that the a356.0 alloy has a ductile behavior. the cyclic softening phenomenon is also observed during stress-strain hysteresis loops. tmf test results demonstrate that the dwell time bears no significant effect upon the lifetime. however, large influences for the maximum temperature and the thermo-mechanical loading factor are depicted in the lifetime of the a356.0 alloy.
کلیدواژه Thermo-Mechanical Fatigue ,A356.0 Aluminum Alloy ,Maximum Temperature
آدرس Sharif University Of Technology, ایران, Sharif University Of Technology, ایران, Chair Of Mechanical Engineering, University Of Leoben, Leoben,, Austria, Chair Of Mechanical Engineering, University Of Leoben, Leoben,, Austria
 
 

Copyright 2015
Islamic World Science Citation Center
All Rights Reserved