>
Fa   |   Ar   |   En
   Fabrication of Spiral Stent With Superelastic/ Shape Memory Nitinol Alloy For Femoral Vessel  
   
نویسنده Noruzi S. ,Sadrnezhaad S. K.
منبع International Journal Of Engineering - 2017 - دوره : 30 - شماره : 7 - صفحه:1048 -1053
چکیده    Stent is a metal mesh tube for opening the obstructed vessels of the body. ni-ti alloy is a suitable metal for fabrication of stent due to its potential for applying the appropriate stress and strain to the vessel walls. in this study, super-elastic nitinol wire was used to build stent samples usable to open femoral vessel. ageing was performed at 500°c for different periods of time to determine the most appropriate transformation temperatures and shape memory/superelasticity behavior of the sample. mechanical and structural properties of the alloy were determined by differential scanning calorimetry (dsc), electron probe micro analysis (epma) and metallographic studies. ability to stand vessel wall pressure was studied by crush test. images of scanning electron microscope (sem) showed that the surface integrity was not affected by strain. the artificial silicon vessel in simulated body fluid (sbf) at 37°c was used for implanting of the crimped stent. the recovery of strain and exertion of stress to the vessel wall was investigated after removal of the stent from the catheter.
کلیدواژه Orthodontic Wire ,Stent ,Superelasticity ,Shape Memory ,Nickel-Titanium Alloy
آدرس Islamic Azad University, Tehran Science And Research Branch, Department Of Biomedical Engineering, Iran, Sharif University Of Technology, Department Of Materials Science And Engineering, Iran
پست الکترونیکی sadrnezh@sharif.edu
 
     
   
Authors
  
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved