Tensile and Morphological Properties of Microcellular Polymeric Nanocomposite Foams Reinforced With Multi-Walled Carbon Nanotubes

Polyamide 6 (pa6) is used in many applications due to its advantages and improving its properties seems essential. for this purpose, in the present study, pa6 was melt compounded with various multi-walled carbon nanotubes (mwcnts) contents and then was foamed using azodi carbon amide (aca) as blowing agent under different injection molding conditions. morphological properties were investigated using x-ray diffraction (xrd) and scanning electron microscopy (sem) tests. according to the results, no agglomeration of mwcnts in the matrix was observed and 0.85, 0.94 and 1 å increase in distance between walls of cnts was detected. also, the sem results illustrated that microcellular structure was achieved in all samples. the results illuminated that mean cell size was improved about 34% in samples containing 1 wt% mwcnt. the tensile properties of samples were investigated and the effect of mwcnts content was studied on specific tensile and yield strengths. the results indicated that specific tensile strength and yield strength were significantly increased almost 164% and 147% by addition of 1 wt% of mwcnts, respectively.