>
Fa   |   Ar   |   En
   بررسی مقاومت pull-off بتن ژئوپلیمری بر پایه سرباره کوره آهن گدازی و پودر زئولیت طبیعی  
   
نویسنده وزیری احمد ,مدندوست رحمت ,رنجبر تکلیمی ملک محمد
منبع تحقيقات بتن - 1402 - دوره : 16 - شماره : 2 - صفحه:27 -45
چکیده    در این مقاله اثر روش عمل آوری (دمای محیط (a)، اوون (o) و آب جوش (bw))، غلظت محلول سدیم هیدروکسید ( 8 و 12 مول در لیتر) و ضخامت دیسک (یعنی 1، 2 و 3 سانتی متر) در مقاومت pull-off بتن ژئوپلیمری بر پایه سرباره کوره آهن گدازی و پودر زئولیت طبیعی مورد بررسی قرار گرفته است. نتایج نشان می‌دهد که مقدار مقاومت pull-off به‌دست‌آمده از دیسک با ضخامت 3 سانتی‌متر به‌طور میانگین 2.6 درصد بیشتر از مقدار به‌دست‌آمده از دیسک با ضخامت 2 سانتی‌متر است. این بدان معناست که دیسک‌های با ضخامت‌های 2 و 3 سانتی‌متر مقادیر تقریباً برابری از مقاومت pull-off را نتیجه داده‌اند. علاوه بر این، مقدار مقاومت pull-off به دست آمده از دیسک با ضخامت 2 سانتی متر به طور متوسط 28.4٪ بیشتر از مقدار به دست آمده از دیسک به ضخامت 1 سانتی متر است. بر اساس نتایج به‌دست‌آمده از دیسک با ضخامت 2 سانتی‌متر: الف) نسبت مقاومت pull-off بدست آمده از نمونه‌های عمل آوری شده در آب جوش و اوون به نمونه عمل آوری شده در دمای محیط به‌ترتیب برابر با 1.383 و 1.089 به‌دست آمده است. ب) با جایگزینی 20% وزن سرباره کوره آهن گدازی با پودر زئولیت طبیعی، مقاومت pull-off به طور متوسط 16.29٪ کاهش می یابد. ج) با افزایش غلظت محلول سدیم هیدروکسید از 8 به 12 مول در لیتر، مقدار مقاومت pull-off به طور متوسط 14.48٪ افزایش می یابد. بر اساس نتایج بدست آمده، یک رابطه غیرخطی قوی بین مقاومت فشاری و مقاومت pull-off بتن ژئوپلیمری وجود دارد.
کلیدواژه آزمایش pull-off، بتن ژئوپلیمری، ضخامت دیسک، روش عمل آوری، آب جوش، غلظت محلول سدیم هیدروکسید
آدرس دانشگاه گیلان، پردیس دانشگاهی, گروه مهندسی عمران, ایران, دانشگاه گیلان, دانشکده فنی, گروه مهندسی عمران, ایران, دانشگاه گیلان, دانشکده فنی, گروه مهندسی عمران, ایران
پست الکترونیکی ranjbar@guilan.ac.ir
 
   investigation of the pull-off strength of geopolymer concrete containing ggbfs and natural zeolite powder  
   
Authors vaziri ahmad ,madandoust rahmat ,ranjbar taklimi malek mohammad
Abstract    in this paper, effects of curing methods (i.e. curing at ambient temperature (a), in oven (o) and in boiling water (bw)), naoh solution concentration (i.e. 8 and 12 moles/liter) and disc thickness (i.e. 1, 2 and 3 cm) on pull-off strength (pos) of the geopolymer concrete containing ground granulated blast furnace slag (ggbfs) and natural zeolite powder (nzp) have been investigated. the results show that the value of the pos obtained from the 3 cm thickness disc is on average 2.6% higher than that obtained from the 2 cm thickness disc. this implies that the discs with thicknesses of 2 and 3 cm have given approximately equal values of the poss. moreover, the value of the pos obtained from the 2 cm thickness disc is on average 28.4% higher than that obtained from the 1 cm thickness one. based on the results obtained from the 2 cm thickness disc: a) the ratios of the poss of the samples cured in boiling water and oven to that of the specimen cured at ambient temperature have been obtained on average equal to 1.383 and 1.089, respectively. b) as 20% wt. of the ggbfs is substituted by the nzp, the value of the pos reduces by an average of 16.29%. c) as the naoh solution concentration increases from 8 to 12 mole/liter, the value of the pos increases by an average of 14.48%. from the results, there is a strong nonlinear relationship between the compressive and pull-off strengths of the geopolymer concrete.
Keywords pull-off test ,geopolymer concrete ,disc thickness ,curing method ,boiling water ,oven ,naoh solution concentration
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved