>
Fa   |   Ar   |   En
   بررسی نقش افزودنی‎ فوق روان‎کننده بر روی مقاومت پیوستگی بتن-فولاد به وسیله آزمایش Pull Out  
   
نویسنده رزمی مهدی ,خدائی نهمت
منبع تحقيقات بتن - 1400 - دوره : 14 - شماره : 1 - صفحه:109 -121
چکیده    پیوستگی مناسب بتن و فولاد از عوامل کلیدی در عملکرد کمپوزیتی سازه‎های بتن‎آرمه است. در این تحقیق، اثر افزودنی‎ فوق روان‎کننده بر روی مقاومت پیوستگی فولادبتن به‎صورت آزمایشگاهی مورد مطالعه قرار گرفته است. تعداد 18 نمونه در دو نسبت اختلاط بتن معمولی و بتن حاوی فوق روان‎کننده تهیه شده است. میلگردهای استفاده شده از سه اندازه قطر 8، 10 و 12 میلیمتر هستند که در طولی معادل با 5 برابر قطر میلگرد در داخل بتن محصور شده‎اند. مقاومت پیوستگی از طریق تست بیرونکشیدگی مستقیم با دستگاه کشش یونیورسال تعیین شده است. 5 عدد نمونه مکعبی استاندارد بتن برای بررسی مقاومت فشاری و مشخصات نمونه‎های سخت شده تهیه شده است. نمونه‎ها در سن 42 روزه مورد آزمایش قرار گرفته اند و منحنی‎های نیروجابجایی آن‎ها با استفاده از روش بیرون‎کشیدگی مستقیم ترسیم شده است. مقادیر نیروی ماکزیمم و جابجایی متناظر با آن، تنش پیوستگی و سایر پارامترهای مهم برای حالات مختلف مورد بحث و بررسی قرار گرفته است. نتایج نشان داد مقاومت پیوستگی بتنفولاد با افزایش قطر میلگرد کاهش می‎یابد. افزودنی فوق‎روان کننده تاثیر قابل توجهی در افزایش مقاومت پیوستگی بتنفولاد و مقاومت فشاری نمونه‎ها دارد، به طور مثال، مقاومت پیوستگی متوسط برای بتن حاوی فوق روان کننده 2.3 برابر بتن معمولی است.
کلیدواژه مقاومت پیوستگی، آزمایش بیرون کشیدگی میلگرد، فوق روان‎کننده، بتن با مقاومت بالا، سازه بتن آرمه
آدرس دانشگاه آزاد اسلامی واحد خورموج, ایران, دانشگاه آزاد اسلامی واحد خورموج, گروه عمران, ایران
پست الکترونیکی n.khodaie@iaukh.ac.ir
 
   Experimental Investigation of the effect of super-plasticizer additive on the concrete-steel bond strength using pull-out test  
   
Authors Razmi Mehdi ,Khodaie Nahmat
Abstract    The bond between concrete and reinforcing steel is essential for the composite action in reinforced concrete structures. In the present study, the effects of superplasticizer additive on the steelconcrete bond strength is experimentally investigated. A total of 18 pullout samples are prepared in two concrete mix design cases, including ordinary and highstrength concrete. The used steel bars are of diameters 8, 10 and 12 mm, which are embedded inside the concrete in a length five times the rebar diameter. The steelconcrete bond strength is evaluated using direct pullout test method with the universal testing machine. Besides preparing the pullout specimens, 5 standard cube samples of concrete are casted to examine the concrete compressive strength and dimensions of the hardened concrete cubes. The specimens are tested at the 42day ages and the slipforce curves are obtained using the pullout test. The maximum force and the corresponding slip, bond stress and other important parameters are determined and discussed for the different studied conditions. The results indicate that the rebarconcrete bond strength decreases by increasing the rebar diameter and the superplasticizer additive has an important effect on the bond strength. For instance, the average bond strength for the concrete mix containing superplasticizer is 2.3 time of that for the normal concrete.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved