|
|
مدلسازی عددی جریان در کانالهای پیچانرودی با مقطع مرکب ذوزنقهیی
|
|
|
|
|
نویسنده
|
فرشی فاطمه ,کبیری سامانی عبدالرضا ,چمنی محمدرضا ,عطوف حسین
|
منبع
|
مهندسي عمران شريف - 1398 - دوره : 35-2 - شماره : 1/2 - صفحه:75 -83
|
چکیده
|
مدلسازی دقیق جریانهای ثانویه در مسیر خمها و پیچانرودها، اهمیت زیادی دارد. در پژوهش حاضر، با مدلسازی عددی در محیط نرمافزاراپنفوم، به بررسی ویژگیهای هیدرولیکی جریان در یک کانال مرکب در مسیر پیچانرود پرداخته شده است. برای این منظور، معادلات حاکم،شامل رابطههای متوسط گیریشدهی رینولدزی (rans) حل شدهاند. با وجود رفتار دوفازی جریان در کانالهای باز، با انتخاب حلگر و شرایط مرزی مناسب برای سطح آب میتوان آنها را بهصورت تکفاز مدل کرد. در پژوهش حاضر، از شرط مرزی تقارن برای سطح آزاد آب استفاده و برای مدلسازی جریان آشفته از مدلهای آشفتگی ɛ-k و ω-k استفاده شده است. طبق نتایج بهدست آمده، با فاصله گرفتن از تاج خم، قدرت جریان عرضی افزایش مییابد؛ بهطوری که یک گردابهی همجهت با جریان عرضی در محل گوشهی ساحل بیرونی تشکیل میشود. این جریان عرضی تا ابتدای تاج خم بعدی ادامه مییابد و مجدداً در طول موج بعدی به همین شکل تکرار میشود.
|
کلیدواژه
|
جریانهای ثانویه، پیچانرود، کانال مرکب، رابطههای ناویر استوکس متوسط رینولدزی
|
آدرس
|
دانشگاه صنعتی اصفهان, دانشکده مهندسی عمران, ایران, دانشگاه صنعتی اصفهان, دانشکده مهندسی عمران, ایران, دانشگاه صنعتی اصفهان, دانشکده مهندسی عمران, ایران, دانشگاه صنعتی اصفهان, دانشکده مهندسی عمران, ایران
|
پست الکترونیکی
|
h.atoof@me.iut.ac.ir
|
|
|
|
|
|
|
|
|
NUMERICAL MODELING OF FLOW IN MEANDERING COMPOUND OPEN CHANNELS
|
|
|
Authors
|
Kabiri-Samani A.R
|
Abstract
|
Secondary currents are important mechanisms in open channels, having major contribution in flow field and its corresponding parameters including boundary shear stress and depthaveraged velocity. Compound open channels involve extra plan form vortices in the flow field. Curved open channels generate especial vortices due to the effects of centrifugal force. Precise modeling of secondary currents in curves and meanders is a very important issue in practical applications. Using open source ``OpenFOAM'' software, the flow field in a meandering channel with compound cross section is simulated herein. Reynolds averaged NavierStocks equations (RANS) are solved. Applying appropriate boundary conditions over the freesurface, the simpleFoam solver has been used to model the twophase airwater flow interface, assuming a steady flow condition, and a symmetry boundary condition. The experimental data from FCF belonging to University of Birmingham is selected for verification and validation of the present numerical results. Two turbulent models of Realizable $kvarepsilon$ and SST $komega$ are applied. Lateral velocity profiles at the cross sections indicate that at each wavelength of a meander, a vortex forms in the main channel at the apex, directing towards the outer bank near the bed and towards the inner bank near the water freesurface. The secondary current patterns, achieved for curved compound open channels differ from those of the simple channels. This is partly due to the interaction of shear stresses occurring at the interfaces between the main channel and the floodplains. Deviation of paths of the main channel and floodplains, downstream of each apex, results in entering the flow from inner bank to the main channel and exiting the flow from the main channel to the outer bank. These flow patterns shift the flow from inner to the outer bank, downstream of each apex. Therefore, a helicoidally secondary current pattern forms, growing in size and strength farther downstream of the apex region.
|
Keywords
|
|
|
|
|
|
|
|
|
|
|
|