|
|
بررسی رفتار محوری ستونهای بتنی محصورشده با دولایه داخلی و خارجی gfrp
|
|
|
|
|
نویسنده
|
وطنی اسکویی اصغر ,مشاطان علی ,آقابراتی حسن
|
منبع
|
مهندسي عمران شريف - 1398 - دوره : 35-2 - شماره : 1/1 - صفحه:111 -118
|
چکیده
|
استفاده از الیاف frp باعث افزایش مقاومت و شکل پذیری ستون های بتن می شود.. همجنین در صورت استفاده از لوله های ساخته شده از الیاف بسپاری 'grp، علاوه بر مزایای ذکر شده و کاهش هزینه یقالب بندی، امکان حذف میلگردهای ستون را نیز برآورده می کند.در هر سازهی عمرانی ممکن است در اثر بارگذاری حدی، مانند زلزله و بادهای شدید، آسیبهای سازهیی ایجاد شود که این آسیبها میتوانند منجر به شکستهای سازهیی فاجعهبار شوند. این در حالی است که اهمیت ارزیابی ایمنی در سازههایی نظیر سدهای بتنی بزرگ که حضور آسیب در آنها علاوه بر ایجاد خسارتهای اقتصادی، ایمنی ساکنان پاییندست سدها را نیز بهخطر میاندازد، بیش از پیش اهمیت مییابد. رویکرد کنترلی سازه، پایش سلامت سازه نامیده شده است. یکی از روشهای جدید و مفید برای تشخیص آسیب در فرایند پایش سلامت سازه، روش تبدیل موجک است. در پژوهش حاضر، بهمنظور کارآمدی روش ارائهشده برای تشخیص موقعیت آسیب در سدهای بتنی وزنی، نتایج حاصل از تحلیلهای استاتیکی و مودال سد بتنی وزنی کوینا، تحت تبدیل موجک قرار گرفته و موقعیت آسیبهای فرضی در نظر گرفتهشده در سد، شناسایی شدهاند. براساس نتایج بهدست آمده، مشاهده شد که در فرایند شناسایی آسیب بر روی دادههای استاتیکی، عواملی همچون نزدیکی ترک به موقعیت نقاط نمونهبردای در میزان ضرایب موجک تاثیر گذار است.نتایج نشان داده است که تغییر مکان خارج محور ستون با افزایش خروج از مرکز مقطع افزایش یافته است.
|
کلیدواژه
|
ستون بتی تقویت شده، gfrp، روش اجزاء محدود، محصور شدگی، شکل پذیری، تغییرمکان محوری.
|
آدرس
|
دانشگاه تربیت دبیر شهید رجایی, دانشکده مهندسی عمران, ایران, دانشگاه آزاد اسلامی, دانشکده مهندسی عمران, ایران, دانشگاه آزاد اسلامی, دانشکده مهندسی عمران, ایران
|
پست الکترونیکی
|
haghabarati@gmail.com
|
|
|
|
|
|
|
|
|
INVESTIGATING THE AXIAL BEHAVIOR OF CONCRETE COLUMN CONFINEMENT WITH INNER AND OUTER GFRP
|
|
|
Authors
|
Vatani Oskouei A.
|
Abstract
|
The retrofitting of concrete columns by using FRP fiber for strength and ductility is taken into consideration. Recent studies have shown that confined concrete with FRP shows different behavior comparing when confined with steel; therefore, the need for research on concrete columns reinforced with FRP is clear. In this study, finite element analysis and modeling by using finite element software are used to investigate the behavior of columns reinforced with GFRP fibers. Model verification is performed by using the results of laboratory study, and the good agreement between test results and finite element modeling is observed. The next step is to examine the parameters of compressive strength of concrete and column shapes in behavior of reinforced column with FRP. The results in terms of vertical displacementforce Graphs and buckling, are extracted and compared.The deterioration of the nation's infrastructure has been well documented and publicized FRP composites have emerged as a potential solution to the problems associated with the infrastructure. An economic application of FRP materials is in the form of composite construction with concrete, such that FRP can act as a loadcarrying partner and protective measure for the structural members. One such application has been demonstrated in fiber jacketing technique, which is now considered as an effective retrofitting tool for the existing columns. By using the principles of fiberwrapping and steeljacketing practice, classic steelconcrete composite columns, FRP pressure vessels, and steelencased plastic piles, a novel type of composite column is proposed that consists of a reinforced concrete core confined in a FRP tubular jacket. The main advantage of FRPconcrete composite construction is the optimal use of materials based on their mechanical properties and resistance to corrosive composite members with pseudo ductile characteristics and high stiffness and strength properties.The composite shell may be a multilayer FRP tube that consists of at least two plies: an inner ply of longitudinal fibers and an outer ply of circumferential fibers. The longitudinal fibers are inhibited from outward buckling by the outer circumferentially oriented fiber ply and from inward buckling by the concrete core. Similar tubes have been made with a center ply of longitudinal fibers sandwiched between two plies of circumferential fibers.
|
Keywords
|
|
|
|
|
|
|
|
|
|
|
|