|
|
مدلسازی عددی پرسیومتر و ارزیابی روشهای تفسیر انبساط حفره در خاک های ماسهیی
|
|
|
|
|
نویسنده
|
احمدی محمد مهدی ,کشمیری احسان
|
منبع
|
مهندسي عمران شريف - 1396 - دوره : 33-2 - شماره : 3/1 - صفحه:3 -11
|
|
|
چکیده
|
پرسیومتری یکی از مهمترین آزمایشهای صحرایی در مهندسی ژئوتکنیک است که برای تعیین ویژگیهای مکانیکی خاک کاربرد دارد. مزیت اصلی دستگاه مذکور، اندازهگیری پیوستهی منحنی تنشکرنش خاک است که جهت تعیین پارامترهای خاک بر مبنای تحلیلهای تئوری (تئوری انبساط حفره) قابل تفسیر است. در پژوهش حاضر، ابتدا آزمایش پرسیومتر به صورت کرنشکنترل در نرمافزار flac مدل شده و جهت صحتسنجی، نتایج مدلسازی عددی با نتایج آزمایشهای صحرایی مقایسه و اثر قطر حفره (پرسیومتر) در نمودار تنشکرنش پرسیومتر بررسی شده است. تفاوت آنالیزهای تغییر شکلهای کوچک و بزرگ در انبساط حفره بررسی و سپس، روشهای تحلیلی انبساط حفره بیان و مقایسهیی بین نتایج آنها با آنالیز عددی انجام شده است تا کارایی هر یک به خوبی مشخص شود. همچنین، روشهای تحلیلی و تجربی تفسیر نتایج پرسیومتر به منظور تعیین زاویهی اصطکاک داخلی ارزیابی و روش بهینهیی پیشنهاد شده است.
|
کلیدواژه
|
مدلسازی عددی پرسیومتر، ارزیابی روشهای تفسیر انبساط حفره، تخمین زاویهی اصطکاک داخلی
|
آدرس
|
دانشگاه صنعتی شریف, دانشکده مهندسی عمران, ایران, دانشگاه صنعتی شریف, دانشکده مهندسی عمران, ایران
|
پست الکترونیکی
|
eks keshmiri@mehr.sharif.ir
|
|
|
|
|
|
|
|
|
NUMERICAL MODELING OF PRESSUREMETER TEST AND EVALUATION OF THE METHODS OF CAVITY EXPANSION INTERPRETATION IN SAND
|
|
|
Authors
|
Keshmiri E. ,Ahmadi M.M
|
Abstract
|
Insitu tests are reliable for determination of soil properties since larger amount of soil is tested in real stress levels. Pressuremeter is one of the most important insitu tests in geotechnical engineering. The main advantage of this instrument is the continuous measurement of soil stressstrain curve which is applicable to determination of soil parameters using cavity expansion theories. In this study, selfboring pressuremeter test has been modelled using the commercial FLAC software. The soil is assumed to behave elasticperfectly plastic, and the MohrCoulomb constitutive model is chosen. The results of the numerical analyses are validated by the measurements of insitu pressuremeter test results which can be found in the literature. Effect of cavity diameter on the cavity expansion curve is observed because pressuremeters have various diameters. It can be concluded that cavity diameter has no effect on cavity stressstrain curve obtained from numerical analysis. Also, the difference between small deformation and large deformation analysis of cavity expansion curve has been assessed. Results show that in the strains smaller than 10 percent, the difference is marginal. Since cavity is generally expanded up to 10 percent strain in the pressuremeter test, small deformation analysis can be applied to the interpretation of this instrument. After that, different theoretical methods of cavity expansion have been compared to the results of numerical analysis. Theoretical methods are based on assumptions which are not appropriate for all conditions and consideration of all aspects of soil behavior is not feasible due to complexity. Also, theoretical and empirical methods of interpretation of pressuremeter test for estimation of internal friction angle are evaluated. Some theoretical methods are based on unloading portion of pressuremeter stressstrain curve due to fewer disturbances. It is realized that empirical methods have greater errors in prediction of friction angle in comparison to theoretical approaches. An optimized method is proposed for estimation of friction angle.
|
Keywords
|
|
|
|
|
|
|
|
|
|
|
|