Strength evaluation of concrete-filled steel tubes subjected to axial-flexural loading by ACI and AISC-LRFD codes along with three dimensional nonlinear analysis

A comparison between design codes i.e. aci and aisc-lrfd in evaluation of flexural strength of concrete filled steel tubular columns (cfts) is examined. for this purpose an analytical study on the response of cfts under axial-flexural loading is carried using three-dimensional finite elements with elasto-plastic model for concrete with cracking and crushing capability and elasto- plastic kinematic hardening model for steel. the accuracy of the model is verified against previous test results. the nonlinear modeling of cft columns shows that the minimum thickness that recommended by aci and aisc-lrfd to prevent local buckling before the steel shell yielding for cft columns could be decreased. the comparison of analytical results and codes indicates that the accuracy of aci method in estimation of axial-flexural strength of cft columns is more appropriate than aisc-lrfd. the aci lateral strength of cfts is located on upper bond of the aisc-lrfd’s provisions. aisc-lrfd estimates the lateral strength conservatively but aci in some ranges such as in short columns or under high axial load levels computes lateral strength in non- conservative manner. supplementary provisions for post local buckling strength of cft columns should be incorporated in high seismic region. this effect would be pronounced for column with high aspect ratio and short columns.