Synthesis of nano- alumina powder from impure kaolin and its application for arsenite removal from aqueous solutions

Adsorption is considered a cost-effective procedure, safer to handle with high removal efficiency. activated aluminais the most commonly used adsorbent for the removal of arsenic from aqueous solutions. however, activatedalumina has a low adsorption capacity and acts kinetically in a slow manner. an ideal adsorbent should have a highsurface area, physical and/or chemical stability and be inexpensive. to meet this requirement, nanomeso porous?-alumina with a high surface area (201.53 m2/g) and small particle size (22–36 nm) was prepared from inexpensivekaolin as the raw material, by precipitation method. the research results showed that adsorbent has the highadsorption capacity (for initial arsenite concentration up to 10 mg/l, in which 97.65% recovery was achieved).optimal experimental conditions including ph, initial arsenite concentration and contact time were determined.langmuir, freundlich and dubinin– radushkevich isotherm models were applied to analyze the experimental data.the best interpretation for the experimental data was given by langmuir adsorption isotherm equation and themaximum arsenite adsorbed by synthesized nano ?–alumina (qe) was found to be 40 (mg/g).