|
|
بررسی تجربی سه مدلبالا رونده با استفاده از تخلیه کرونا مثبت و منفی
|
|
|
|
|
نویسنده
|
زمانی عارف ,خوشخو روح الله ,هاشم زاده غلامرضا
|
منبع
|
علوم و فناوري هاي پدافند نوين - 1401 - دوره : 13 - شماره : 4 - صفحه:251 -262
|
چکیده
|
عملگرهای پلاسما بخصوص عملگر پلاسمای کرونا به علت توان الکتریکی مصرفی کم، عدم داشتن بخش متحرک، عدم تولید صدا و راندمان بالا و عدم تولید امواج مادونقرمز به عنوان یک سیستم پیشران بسیار مورد توجه دانشمندان و محققان قرار گرفته اند. یک نمونه از کاربردهای تخلیه کرونا، ساخت بالارونده (لیفتر) است. در این تحقیق، سه مدل بالارونده مثلثی، مربعی و سه ضلعی با راس مشترک طراحی و ساخته شد. سپس، پارامترهای توان مصرفی، میزان ضریب اثربخشی و میزان نیروی پیشران تولیدی در تخلیه کرونای مثبت و منفی مورد بررسی آزمایشگاهی قرار گرفت. نتایج حاصل از تحقیق نشان می دهد، در هر سه مدل، رابطه بین تغییرات ولتاژ با نیروی پیشران در کرونای مثبت و منفی بهصورت تقریباً خطی است و افزایش میزان ولتاژ باعث افزایش نیروی پیشران می شود. اما رابطه بین ولتاژ و توان الکتریکی در هر سه مدل در کرونای مثبت و منفی بهصورت سهموی شکل است. بیشترین میزان نیروی پیشران در هر دو کرونای مثبت و منفی، به ترتیب مربوط به مدل مربعی و سپس مدل سه ضلعی با راس مشترک بود. در نهایت، بیشترین میزان ضریب اثربخشی در کرونای مثبت به ترتیب مربوط به مدل مربعی و سپس مدل سه ضلعی با راس مشترک و در کرونای منفی، به ترتیب مربوط به مدل مربعی و مدل مثلثی است.
|
کلیدواژه
|
بالارونده، طراحی و ساخت، عملگر پلاسمای کرونا، باد یونی
|
آدرس
|
دانشگاه صنعتی مالک اشتر, ایران, دانشگاه صنعتی مالک اشتر, ایران, دانشگاه صنعتی مالک اشتر, ایران
|
پست الکترونیکی
|
hashemzadeh.gr@iran.ir
|
|
|
|
|
|
|
|
|
experimental study of three lifters using positive and negative corona discharge
|
|
|
Authors
|
zamani aref ,khoshkhoo roohollah ,hashemzadeh gholam reza
|
Abstract
|
scientists and researchers have been interested to plasma actuators, especially corona plasma actuators as propulsion system, due to their low power consumption, no moving part, silent, high efficiency and infrared waves. an example of corona discharge applications is lifters. in this research, triangular, square and three sides’ with a common vertex models with a common vertex were designed and built. then, the parameters of electric power, effectiveness coefficient and thrust in the discharge of positive and negative coronas were investigated in the experimental study. the results of the research show that in all three models, the relationship between voltage changes and thrust in positive and negative coronas is almost linear, and increasing the amount of voltage causes an increase thrust. but the relationship between voltage and electric power in all three models in positive and negative coronas is parabolic. the highest amount of thrust in both positive and negative coronas was related to the square model and then the three sides’ model with a common vertex. finally, the highest effectiveness coefficient in the positive corona is related to the square model and then the three sides’ model with a common vertex, and in the negative corona, it is related to the square model and the triangular model, respectively.
|
Keywords
|
lifter ,design and manufacture ,corona plasma actuator ,ionic wind
|
|
|
|
|
|
|
|
|
|
|