characterization of dlc thin films deposited by dc-pulsed pacvd using methane precursor

In this work, diamond like carbon (dlc) thin films were deposited on aluminum alloy 6061 by plasma-assisted chemical vapor deposition (pacvd). nitiding prior to coated leads to appropriate hardness gradient and it can greatly improve the mechanical properties of the coatings. the composition, crystalline structure and phase of the films were investigated by grazing incidence x-ray diffraction (gixrd). atomic force microscopy (afm) and scanning electron microscopy (sem) were employed to observe the morphology and structure of the film. the dlc layer exhibited a columnar structure. the adhesion force between the film and the aluminum alloy 6061 was 30.8 mpa. the dlc film was determined by the pull of test. the hardness of the dlc film was 12.75 gpa. the improvement of the adhesion dlc was attributed to a less gradient hardness configuration. in addition, the mean friction coefficient of the films was about 0.2 determined by nanoindentation test. according to the results, the high and unique hardness of this coating leads to increase of the wear resistance and thus the useful life of parts.