the effect of process parameters and tool geometrical parameters on the tool peak temperature in machining process

In the present study, the effects of process and geometrical parameters on the maximum temperature of tool have been investigated. simulation of mild steel machining process in different cutting depths, speed of rotation (sor), feeding rates, and different rake angles was performed. to verify the simulation, numerical results were compared with experimental results. based on the results, it was found that by increasing the speed of rotation at a constant cutting depth and a constant feed rate, the maximum temperature of the process experiences a significant increase. by increasing the depth of the cut, the geometric location of the workpiece maximum temperature was transmitted to the edge of the tool and surface changes occurred, which it was accompanied with increment in the depth of the cut. the tool with the rake angle of 10° and the depth of cutting of 2 mm had the highest recorded temperature due to the lack of sufficient space for removing chips from the work surface.