>
Fa   |   Ar   |   En
   بررسی زمین شناسی و زمین‌ شیمی کانسار مس- طلای پورفیری- اپی‌ ترمال چوران در زیر پهنه دهج- ساردوئیه از کمان ماگمایی ارومیه- دختر  
   
نویسنده زراسوندی علیرضا ,طاشی مجید ,رضایی محسن ,ساکی عادل ,موسیوند فردین
منبع زمين شناسي اقتصادي - 1401 - دوره : 14 - شماره : 1 - صفحه:39 -66
چکیده    کانسار مس طلای چوران در 70 کیلومتری شهرستان بردسیر و در بخش جنوبی کمربند ماگمایی ارومیه دختر قرار‌گرفته است. کانه زایی در این منطقه مرتبط با توده های گرانودیوریت و کوارتز دیوریت با سن الیگو میوسن است که در توالی آتشفشانی رسوبی ائوسن نفوذ کرده­اند. کانه زایی از عمق به سطح به ترتیب شامل کانه های مگنتیت، پیریت، کالکوپیریت، آرسنوپیریت، اسفالریت، گالن و تورمالین است. در قسمت های  سطحی کانسار رگه های سیلیسی سولفیدی با ضخامت های متغیر (50 تا 150 سانتی‌متر) دیده می شود. عمده دگرسانی ها در این کانسار از عمق به سطح، شامل دگرسانی های سدیک کلسیک، پتاسیک، فیلیک (مربوط به یک سامانه پورفیری)، آرژیلیک، آلونیت (مربوط به یک سامانه اپی‌‌ترمال) و در قسمت‌های سطحی دگرسانی سیلیسیک است. بر اساس بررسی‌های شیمی سیلیکات، پلاژیوکلازهای توده های گرانودیوریت و کوارتزدیوریت از نوع آندزین است. بر اساس نمودار al / (ca + na + k) (apfu)  در مقابلan% ، کلیه پلاژیوکلازهای توده گرانودیوریتی کانسار چوران در محدوده نفوذی­های کانه دار و پلاژیوکلازهای کوارتزدیوریت در محدوده نفوذی­های نابارور به سمت بارور قرار‌گرفته است. میزان فلوئور‌iv(f), ، کلر iv (cl) و نسبت فلوئور به کلرiv (f/cl) در بیوتیت‌های کوارتز دیوریت، به ترتیب 2.2تا4.0، 5.6 تا 5.5، 7.8 تا 9.6 و در گرانودیوریت به ترتیب 2.0 تا 2.4، 5.8 تا 5.6 و (7.7 تا 8.1) است. با توجه به ویژگی‌هایی مانند تغییرات نوع کانه زایی، دگرسانی و مشاهدات صحرایی می‌توان اظهار داشت، که کانسار مس طلای چوران مثالی از یک سامانه انتقالی پورفیری به لیتوکپ اپی‌ترمال سولفیداسیون بالاست.
کلیدواژه مس- طلا، چوران، پورفیری، اپی‌ ترمال سولفیداسیون بالا، شیمی پلاژیوکلاز و بیوتیت
آدرس دانشگاه شهید چمران اهواز, دانشکده علوم زمین, گروه زمین‌ شناسی, ایران, دانشگاه شهید چمران اهواز, دانشکده علوم زمین, گروه زمین‌ شناسی, ایران, دانشگاه شهید چمران اهواز, دانشکده علوم زمین, گروه زمین‌ شناسی, ایران, دانشگاه شهید چمران اهواز, دانشکده علوم زمین, گروه زمین‌ شناسی, ایران, دانشگاه صنعتی شاهرود, دانشکده علوم زمین, گروه زمین‌شناسی, ایران
پست الکترونیکی mousivand@shahroodut.ac.ir
 
   Geology and geochemistry of the Choran porphyry-epithermal Cu-Au deposit in the Dehej-Sarduveyeh subzone, Urumieh-Dokhtar magmatic arc  
   
Authors Zarasvandi Alireza ,Tashi Majid ,Rezaei Mohsen ,Saki Adel ,Mousivand Fardin
Abstract    IntroductionIran hosts numerous porphyry and epithermal ore deposits which have mostly been formed at discrete time periods within different tectonic assemblages. Porphyry and epithermal ore deposits are considered to be the important sources of base metals in Iran. Wellknown porphyry deposits include the Sarcheshmeh, Meiduk, Sungun, (Shahabpour and Kramers, 1987; Hezarkhani and Williams, 1998; Taghipour et al., 2008), and wellknown epithermal deposits include the Sari Gunay, Chah Zard, Touzlar, and Narbaghi (Richards et al., 2006, Kouhestani et al., 2012, Heidari et al., 2018). The Choran deposit exists in the UrumiehDokhtar Magmatic Belt (UDMB). This deposit is located in the southern part of the Cenozoic UrumiehDokhtar Magmatic Belt, 70 km SW of Bardsir city, SE Iran. In this area, mineralization is associated with Oligocene Miocene quartz diorite and granodiorite intrusions emplaced within Eocene volcanic–pyroclastic sequences. This study has focus on the spatial and temporal relationships between the porphyry and epithermal styles of mineralization in this area. Materials and methodsA camp was set up in the field and sampling was performed during the 20172018. During the field observations, 286 rock samples were collected from the outcrops and drill core, and 67 thin sections were prepared and studied using a polarizing microscope in the Shahid Chamran University of Ahvaz. In order to correctly characterize the chemical composition of silicates (plagioclase and biotite), samples with least traces of alteration have been selected. The chemical composition of plagioclase and biotite were determined on the carbon coated thin section samples using an Electron Probe Micro Analyzer (EPMA). All the analyses were conducted at the Montanuniversitat Leoben, Austria using a superprobe Jeol JXA 8200 instrument. Results Based on drill core logging and petrographic studies, mineralization in the Choran deposit is mainly accompanied with granodiorite intrusions. Overall, both hypogene and supergene mineralizations have been identified in the study area. The hypogene mineralization mainly occurs as disseminated blebs and veins which consist of pyrite, arsenopyrite and chalcopyrite with minor amounts of sphalerite. The supergene mineralizations that involve chalcocite and covellite. The first generation of hydrothermal veins (Atype) are characterized by assemblages of quartz + Kfeldspar ± magnetite occurring roughly in the potassic alteration. This is followed by Btype veins characterized by assemblages of quartz + pyrite + chalcopyrite + feldspar ± biotite ± magnetite ± calcite. Type C veinlets (1 mm to 5 cm width) contain quartz + pyrite ± chalcopyrite and exhibit an intense stockwork texture in the potassic and phyllic alteration zones. The supergene sulfide zone is dominated by chalcopyrites and it is completely or partly replaced by chalcocite, digenite, and covellite. The hydrothermal alteration consisting of sodicpotassic, potassic, phyllic alunite and kaolinite are associated with granodiorite and quartz diorite intrusions. The result of EPMA analyses showed that all of the plagioclases in granodiorite and quartz diorite are consistently of andesine type. Based on the diagram of Al / (Ca + Na + K) (a.p.f.u) vs. An%, (Williamson et al., 2016) plagioclase samples of granodiorite intrusions plot collectively in the field of fertile calcalkaline rocks associated with porphyry mineralization, while the quartz diorite samples are mostly plotted in the barren field. The results of biotite analyses indicate that all biotites of granodiorite and quartz diorite intrusions are of Mgbiotite type. The amounts of IV (F), IV (Cl), and IV (F/Cl) in the biotites of quartz diorite and granodiorite are between (2.28 to 4.08), (5.62 to 5.52), (7.87 to 9.64) and (2.03 to 2.45), ( 5.81 to 5.66), (7.74 to 8.18), respectively.  DiscussionMost of the characteristics of the Choran CuAu deposit, i.e. geological setting, textural and structural, mineralogical with alteration features, are analogous to that of porphyry systems having highsulphidation epithermal lithocap (Hedenquist et al., 1998; Muntean, 2001; Sillitoe, 2010). AcknowledgementsThis research was made possible by a grant (No: SCU.EG98.582) from the office of vicechancellor for research and technology, Shahid Chamran University of Ahvaz. We acknowledge their support. The fifth author expresses his appreciation to the University of Shahrood Grant Commission for research funding.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved