>
Fa   |   Ar   |   En
   بررسی ویژگی‌های خاکستر حاصل از زیست توده‌های لیگنوسلولزی مختلف  
   
نویسنده معزی پور بیتا
منبع صنايع چوب و كاغذ ايران - 1403 - دوره : 15 - شماره : 1 - صفحه:97 -110
چکیده    با توجه به جایگاه ویژه زیست‌توده در تامین انرژی‌ در دنیای امروز و گسترش روزافزون استفاده از این منابع تجدیدپذیر، پیش‌بینی می‌شود که تولید خاکستر در آینده افزایش‌یابد. از این‌رو اهمیت مدیریت و بازیافت خاکستر زیست‌توده با اهداف زیست‌محیطی و اقتصادی بیش از پیش آشکار شده‌است. در این مطالعه ویژگی‌های خاکستر حاصل از زیست‌توده‌های لیگنوسلولزی مختلف مورد بررسی قرار‌گرفت. به‌این منظور، از دو روش کوره الکتریکی و سوزاندن در هوای آزاد برای تهیه خاکستر از شش نوع زیست‌توده لیگنوسلولزی شامل پوسته شالی، کاه گندم، سرشاخه درختان، پسماند mdf، الیاف بازیافت شده از پسماند mdf و خمیر کاغذ باطله استفاده‌شد. مقدار، ابعاد، رنگ، ph و ترکیب شیمیایی حاصل از زیست‌توده‌های مختلف مورد بررسی قرار‌گرفت. کمترین مقدار خاکستر در الیاف بازیافتی و بیشترین مقدار خاکستر در پوسته شالی مشاهده‌شد. تمام خاکسترها قلیایی بودند.رنگ خاکستر بدست‌آمده از روش کوره الکتریکی روشن‌تر از هوای آزاد بود. کمترین ابعاد ذرات خاکستر مربوط به خاکستر خمیرکاغذ روش کوره الکتریکی و بزرگترین ابعاد مربوط به خاکستر سرشاخه حاصل از روش هوای آزاد بود. ترکیبات شیمیایی خاکسترها با هم متفاوت بود. اطلاعات بدست‌آمده در تعیین کاربرد مناسب برای خاکسترها مفید می‌باشد.
کلیدواژه پسماند، سیسلیس، احتراق، بازیافت، تثبیت خاک، بتون
آدرس دانشگااه محقق اردبیلی, دانشکده کشاورزی و منابع طبیعی, گروه صنایع چوب و کاغذ, ایران
پست الکترونیکی b.moezzipour@uma.ac.ir
 
   investigating the characteristics of ash obtained from different lignocellulosic biomass  
   
Authors moezzipour b.
Abstract    considering the pivotal role of biomass in contemporaryenergy provision and the escalating utilization of theserenewable resources, a corresponding increase in ashproduction is anticipated in the future. consequently, the significance of biomass ash management and recycling, pertaining to environmental and economic considerations, has become increasingly evident. in this study, we investigated the properties of ash derived from various lignocellulosic biomasses. to this end, ash was prepared from six types of lignocellulosic biomass—rice husk, wheat straw, tree branches, mdf waste, recycled fibers from mdf waste, andwaste paper pulp—using two methods: electric furnace and open-air combustion. we examined the content, dimensions, color, ph, and chemical composition of the different biomasses. the lowest ash content was observed in recycled fibers, while the highest was found in rice husk. all ashes exhibited alkaline properties. ashes produced by the electricfurnace method displayed brighter coloration compared to those from open-air combustion. the smallest ash particle dimensions were associated with pulp ash from the electric furnace method, while the largest were linked to branch ash obtained through the open-air method. additionally, the chemical compositions of the ashes varied. the insights gleaned from this study are instrumental in determining suitable applications for the ashes.
Keywords wastes ,silica ,incineration ,recycling ,soil stabilization ,concrete
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved