|
|
آناتومی چوب و بیومتری الیاف درخت انار (punica granatum. l) در راستای شعاعی و طولی ساقه درخت
|
|
|
|
|
نویسنده
|
حسن پور تیچی علی ,غلامیان هادی
|
منبع
|
صنايع چوب و كاغذ ايران - 1401 - دوره : 13 - شماره : 4 - صفحه:487 -496
|
چکیده
|
در این گزارش به مطالعه ویژگی بیومتری الیاف و میکروسکوپی چوب درخت انار پرداخته شد. بدین منظور درختان انار از باغات شهرستان نکا (استان مازندران) انتخاب و قطع شدند. در ارتفاع برابر سینه، ارتفاع 2.5 متر و ارتفاع 3.5 متر سه دیسک به ضخامت 5 سانتی متر تهیه و در جهت عرضی نمونه های آزمونی cm2×2 به طول cm 3 از مغز به سمت پوست به صورت متوالی بریده و مورد ارزیابی قرار گرفت. در این تحقیق خواص بیومتری الیاف شامل طول الیاف، قطر حفره سلولی، قطر کلی فیبر و ضخامت دیواره سلولی اندازه گیری شد. همچنین ویژگی آناتومی چوب درخت انار مطابق با لیست آناتومیست های جهان (iawa) با استفاده از میکروسکوپ نوری مورد مطالعه قرار گرفت. نتایج بررسی آناتومی چوب درخت انار به صورت چند تایی بودن گروه بندی آوند ها در راستای شعاعی ( در اغلب موارد)، اشعهچوبی همگن، دریچه آوندی ساده، منافذ بینآوندی متناوب، میانگین طول عناصر آوندی کوتاهتر از 350 میکرون، پراکنده آوند بودن تخلخل چوب گزارش شده است. نتایج ویژگی بیومتری الیاف نشان داد که هم در جهت عرضی و هم در جهت طولی ساقه درخت انار، بین طول الیاف، پهنای الیاف، قطر حفره سلولی و ضخامت دیواره سلولی الیاف اختلاف معنی داری وجود دارد. بطوریکه خواص بیومتری الیاف از مغز به سمت پوست درخت روند صعودی داشتند. میانگین طول، قطر کلی، قطر حفره سلولی و ضخامت دیواره الیاف به ترتیب برابر با 0.75 میلی متر، 22.5 میکرون، 18.3 میکرون و 4.2 میکرون اندازه گیری شد.
|
کلیدواژه
|
انار، ارتفاع برابر سینه، ویژگی بیومتری، طول الیاف
|
آدرس
|
دانشگاه فنی و حرفه ای, گروه مهندسی چوب, ایران, دانشگاه تهران, دانشکده منابع طبیعی, گروه علوم و صنایع چوب و کاغذ, ایران
|
پست الکترونیکی
|
hadi_gholamiyan@ut.ac.ir
|
|
|
|
|
|
|
|
|
wood anatomy and fiber biometry of pomegranate wood (punica granutum l.) in a radial and longitudinal direction of tree
|
|
|
Authors
|
hassanpoor tichi a. ,gholamiyan h.
|
Abstract
|
in this report, fiber biometry and microscopic features of pomegranate wood were discussed. for this purpose, pomegranate trees were selected and cut from the gardens of neka city (mazandaran province). three discs of 5 cm thickness were prepared at breast height, 2.5 m height, and 3.5 m height. in the transverse direction, the test specimens were cut 2 × 2 cm to 3 cm from the pith to the bark sequentially and were examined. fiber biometric properties including fiber length, fiber lumen diameter, fiber diameter and cell wall thickness were measured. also, the anatomical properties of pomegranate wood were studied according to the iawa list of microscopic features for hardwood identification using a light microscope. wood anatomical features of pomegranate are as follows: diffuse-porous with multiple vessel groupings in the radial direction (in most cases), homogenous rays, simple perforation plates, alternate intervessel pits, the average length of vessel elements shorter than 350 microns. the results of fiber biometrics showed that there is a significant difference in the length of fibers, the diameter of fibers, the diameter of fiber lumina, and the thickness of the cell wall of the fibers, both in the radial, and in the longitudinal direction of the pomegranate tree stem. so that the biometric properties of the fibers increased from the pith to the bark. the average fiber length, fiber lumen diameter, fiber diameter and cell wall thickness of the fibers were measured as 0.75 mm, 22.5 µm, 18.3 µm and 4.2 µm, respectively.
|
|
|
|
|
|
|
|
|
|
|
|
|