>
Fa   |   Ar   |   En
   اثر پیش‌تیمار قلیایی و اشباع سطحی بر بازگشت فشردگی چوب فشرده‌ صنوبر  
   
نویسنده شجاع محمد ,دستوریان فروغ ,قربانی مریم ,ذبیح زاده مجید
منبع صنايع چوب و كاغذ ايران - 1399 - دوره : 11 - شماره : 3 - صفحه:345 -354
چکیده    فرایند لیگنین زدایی از چوب و متعاقباً فشرده سازی آن‌یکی از جدیدترین راهکارهای اصلاح چوب است که به افزایش قابل ملاحظه مقاومت های مکانیکی چوب می انجامد؛ اما به دلیل خروج لیگنین آب گریز، مشکل جذب رطوبت و بازگشت فشردگی چوب فشرده همچنان باقی می ماند. در تحقیق حاضر نمونه های چوب صنوبر متعاقب لیگنین زدایی با محلول هیدروکسید سدیم و سولفیت سدیم و سپس غوطه‌وری در محلول گلیسرول-اسیدسیتریک، توسط پرس نیمه صنعتی در دمای 100 درجه سانتی گراد به مدت 24 ساعت فشرده شدند. بر اساس نتایج، بازگشت فشردگی چوب لیگنین زدایی شده تا حد زیادی کاهش یافت. نتایج طیف سنجی زیر قرمز بر روی نمونه فشرده لیگنین زدایی شده، برقراری پیوند هیدروژنی جدید بین واحدهای سلولزی در وضعیت فشرده را تایید کرد که موید کاهش رفتار فنری و بازگشت فشردگی می باشد. اشباع با ترکیب گلیسرول-اسید سیتریک به کاهش قابل‌ملاحظه بازگشت فشردگی منجر شد. نتایج طیف سنجی زیر قرمز و همچنین بررسی ریزساختاری، حضور پلی استر در داخل چوب در سطح فشرده اشباع‌شده را تایید کرد.
کلیدواژه لیگنین‌زدایی، فشرده سازی، اصلاح‌ چوب، بازگشت‌فشردگی
آدرس دانشگاه علوم کشاورزی و منابع طبیعی ساری, گروه مهندسی چوب و فرآورده‌های سلولزی, ایران, دانشگاه علوم کشاورزی و منابع طبیعی ساری, گروه مهندسی چوب و فرآورده‌های سلولزی, ایران, دانشگاه علوم کشاورزی و منابع طبیعی ساری, گروه مهندسی چوب و فرآورده‌های سلولزی, ایران, دانشگاه علوم کشاورزی و منابع طبیعی ساری, گروه مهندسی چوب و فرآورده‌های سلولزی, ایران
پست الکترونیکی m.zabihzadeh@sanru.ac.ir
 
   Effect of alkaline pretreatment and surface impregnation on the set recovery of densified poplar wood  
   
Authors shoja Muhammad ,Dastoorian Foroogh ,Ghorbani Maryam ,Zabihzadeh seyed majid
Abstract    Delignification and subsequently densification of wood is one of the newest approaches leads to a considerable improvement in mechanical properties of wood. However, because removal of the hydrophobic lignin, the problem of set recovery is still remained. In the present study, the poplar wood samples were chemically treated with sodium hydroxide and sodium sulfite solution and then were soaked in the solution of glycerolcitric acid; then densification was conducted in a pilot hydraulic press at temperature of 100oC for duration of 24 hours. Set recovery of the densified samples was decreased considerably, however removal of the hydrophobic lignin led to increase of the thickness swelling and antiswelling efficiency became negative. Results of infrared spectroscopy on the delignified densified samples proved the formation hydrogen bonding between cellulosic units in compressed state which is a good reason for decreasing the set recovery. Surface impregnation with glycerolcitric acid combination led to a considerable reduction of set recovery. The infrared spectroscopy and also the microscopic study showed the presence of polyesters in the microstructure of the densifiedimpregnated samples.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved