>
Fa   |   Ar   |   En
   طراحی، شبیه سازی و ساخت آنتن میکرواستریپ پهن باند با بهره بالا دارای پلاریزاسیون دایروی مبتنی بر صفحه زمین ناقص  
   
نویسنده درستکار یاقوتی بهنام
منبع علوم و فناوري دريا - 1402 - دوره : 27 - شماره : 108 - صفحه:12 -22
چکیده    در این مقاله یک آنتن مایکرواستریپی با ابعاد مناسب و پهنای باند پلاریزاسیون دایروی وسیع طراحی و شبیه‌سازی و ساخته شده است. این آنتن با صفحه زمین ناقص و تغذیه دوگانه طراحی شده است. همچنین این آنتن دارای صفحه زمین ناقص به شکل خلاقانه است که از صفحه زمین حذف می‌شود. در آنتن پیشنهادی با ورودی دوگانه و پچ یک چهارم دایروی که با تغییرات وسیع در صفحه زمین با هدف ایجاد پهنای باند وسیع و نسبت محوری مناسب ارائه شده است. آنتن شامل دو خط انتقال بلند و دو پورت در پچ آنتن است. آنتن ساخته شده دارای ابعاد بیرونی آنتن 40 × 50 میلی متر مربع و ارتفاع fr4 بستر 1.6 میلی متر است. بکارگیری صفحه زمین ناقص در آنتن پیشنهادی تطابق امپدانس را بهبود داده و پارامترهای s و نسبت محوری (ar ) را افزایش می‌دهد. نتایج اندازه گیری نشان می دهد که آنتن پیشنهادی با صفحه زمین ناقص می‌تواند کوپلینگ را کاهش داده و پلاریزاسیون دایروی را بهبود بخشد. نتایج اندازه گیری و شبیه سازی‌ نشان می‌دهد که آنتن پیشنهادی دارای پهنای باند وسیع از 4.89 تا 6.85 گیگاهرتز برای تلفات بازگشتی است .
کلیدواژه آنتن میکرواستریپ، گین بالا، پلاریزاسیون دایروی، پهن باند
آدرس دانشگاه علوم انتظامی امین, گروه فناوری اطاعات و ارتباطات, ایران
پست الکترونیکی behnamdorostkar@gmail.com
 
   design, simulation and fabrication of high-gain broadband microstrip antenna with circular polarization based on defected ground structure  
   
Authors dorostkar yaghouti behnam
Abstract    in this article, a microstrip antenna with suitable dimensions and wide circular polarization bandwidth has been designed, simulated, and built. this antenna is designed with an incomplete ground plane and dual feeding. also, this antenna has an incomplete ground plane in a creative way, which is removed from the ground plane, in the proposed antenna with dual input and a quarter circular patch, which is presented with wide changes in the ground plane with the aim of creating a wide bandwidth and a suitable axial ratio. the antenna includes two long transmission lines and two ports in the antenna patch. the fabricated antenna has external antenna dimensions of 40 × 50 mm2 and fr4 substrate height of 1.6 mm. using the incomplete ground plane in the proposed antenna improves the impedance matching and increases the parameters s and axial ratio (ar). the measurement results show that the proposed antenna with an incomplete ground plane can reduce the coupling and improve the circular polarization. the measurement and simulation results show that the proposed antenna has a wide bandwidth from 4.89 to 6.85 ghz for return loss.
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved