|
|
تولید نانو ذرات فریت مس منگنز دوپه شده با کادمیم به روش هم رسوبی و بررسی خواص حسگری آن به منظور تشخیص گاز متان در مراکز مخابرات
|
|
|
|
|
نویسنده
|
امامی حسین ,اعتصامی محسن
|
منبع
|
فرآيندهاي نوين در مهندسي مواد - 1398 - دوره : 13 - شماره : 2 - صفحه:77 -85
|
چکیده
|
در این مطالعه، به تولید نانو ذرات فریت مس منگنز دوپه شده با کادمیم و بررسی حساسیت آنها پرداخته شده است. روش به کار رفته برای ساخت نانو حساسه روش همرسوبی است که برای این ترکیب روش جدیدی است. برای بررسی ساختار این نانو حساسه از آزمایشاتی نظیر پراش پرتو ایکس (xrd)که تک فاز بودن ترکیب و نانو بودن آن را نشان میدهد؛ وآزمایش میکروسکوپ الکترونی عبوری (tem)که اندازه نانو ذرات را مشخص کرده (کمتر از 50 نانومتر) و همین طور یکنواختی آنها را نمایش میدهد، استفاده شده است. برای آزمون حساسیت پذیری این نانو حساسه از یک دستگاه آزمایشگاهی با قابلیت کنترل دما بهره برده شد که مجهز به یک گرم کن حساسه با کنترل دما بوده و حساسه روی آن قرار میگیرد و یک محفظه برای تزریق گونههای مورد آزمایش، و یک برد الکترونیکی رابط که اطلاعات نانوحساسه را به سیستم رایانه انتقال و توسط نرم افزار مربوطه مورد تجزیه و تحلیل قرار میگیرد. در مورد این نانو حساسه که باگاز متان موردآزمایش قرار گرفت؛ حساسیت پذیری دما مناسب برای پاسخ این نانو حساسه 300 درجه سانتیگراد بود.
|
کلیدواژه
|
نانو ذرات فریت مس منگنزدوپه شده با کادمیم، پرتو ایکس، حساسیت پذیری، متان
|
آدرس
|
دانشگاه آزاد اسلامی واحد شهر مجلسی, ایران, دانشگاه آزاد اسلامی، اصفهان واحد شهر مجلسی, مرکز تحقیقاتی مهندسی پیشرفته, ایران
|
|
|
|
|
|
|
|
|
|
|
Production of cupper manganese ferrite cadmium doped nanoparticles via co precipitation method and study of its sensitivity property for methane gas detection in telecommunications centers
|
|
|
Authors
|
Emami Hossein ,Etesami Seyed Mohsen
|
Abstract
|
In this study, synthesis and studying sensitivity of nano particles of manganese copper ferrite with common formula of cupper manganese ferrite cadmium doped has been considered. Applied method for manufacturing this nanoparticle is coprecipitation method that is a novel method for this combination. Nano particle structure has been investigated using experiments such as Xray diffraction which showed single–phase and Nano characteristics of this combination and scanning electron microscope which showed the size of nanoparticles and uniformity. Sensitivity of the nano particles was tested using a laboratory system equipped with sensor heater with the ability of temperature control on which nano sensor was put, a chamber for injecting related materials and a connector electronic range that transferred Nanosensor information to computer and it was analyzed by a software. This system could control temperature. This Nano sensor was tested using Methane that sensitivity and suitable temperature for this Nano sensor was 300˚C.
|
Keywords
|
|
|
|
|
|
|
|
|
|
|
|